Part No.: | 1-808-30-00 |
Part No.:
1-808-30-00
- 2 teach points / acquisition of 2 end positions
- depending on magnetic field, stroke up to 50 mm ascertainable
- compact configuration
- easy clamping with stud screw
- for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
- Connector KG 8-4
- Sensor Bracket GRF SH
- Adapter ASY
Ambient temperature: | -25...80°C |
---|---|
Cable length: | - |
Connection: | - |
Connection thread: | M8x1 |
Contact: | closing contact |
Material: | Plastic material |
Range: | - |
Schaftdurchmesser: | - |
Weight: | 11 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
X 25-25-1000 Aluminiumprofile 1000 mm
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 25-25-2000 Aluminiumprofile 2000 mm
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 25-25-0001 Aluminiumprofile Length: Individual Cut
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 50-25-1000 Aluminiumprofile 1000 mm
for parts up to 10 kg
custom length on request
special profile length larger than 2000 mm on request
X 50-25-2000 Aluminiumprofile 2000 mm
for parts up to 10 kg
custom length on request
special profile length larger than 2000 mm on request
X 50-25-0001 Aluminiumprofile Length: Individual Cut
for parts up to 10 kg
custom length on request
special profile length larger than 2000 mm on request
X 25-10-2000 Aluminiumprofile 2000 mm
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-10-0001 Aluminiumprofile Length: Individual Cut
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-18-2000 Aluminiumprofile 2000 mm
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-18-0001 Aluminiumprofile Length: Individual Cut
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
JU 40-40-2000 Aluminiumprofile 2000 mm
specifically developed profile for part weight larger than 10 kg
custom length on request
special profile length larger than 2000 mm on request
channel nut can be dropped in
JU 40-40-0001 Aluminiumprofile Length: Individual Cut
specifically developed profile for part weight larger than 10 kg
custom length on request
special profile length larger than 2000 mm on request
channel nut can be dropped in
JU 80-40-2000 Aluminiumprofile 2000 mm
specifically developed profile for part weight larger than 10 kgcustom length on request special profile length larger than 2000 mm on requestchannel nut can be dropped in
JU 80-40-0001 Aluminiumprofile Length: Individual Cut
specifically developed profile for part weight larger than 10 kgcustom length on request special profile length larger than 2000 mm on requestchannel nut can be dropped in
SH GRZ 10-08 Sensor Bracket
allows easy installation of a sensor
1 or 2 switching points can be monitored in combination with the sensor
gripping jaw area unchanged
suitable for Sensor MFS T 2 3,7
SH GRZ 14 Sensor Bracket
allows easy mounting of a sensor
two positions can be monitored (open/closed)
space saving
gripping jaw area unchanged
SH GRZ 20 Sensor Bracket
every GRZ 20 Gripper Jaws contains magnets
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 basic positions
Accessories e.g.:
Sensor MFS T2 3,7 (Part No. 1-808-30-00)
GRF SH 20 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH 30 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH 20 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
GRF SH 30 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
GRF SH 14 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
GRF SH 14 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
SH IGB 27 28-37 Sensor Bracket for IGB
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 positions
SH IGB 33 34-45 Sensor Bracket for IGB
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 positions
SH IGB 41 42-54 Sensor Bracket for IGB
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 positions
SH IGB 51 54-68 Sensor Bracket for IGB
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 positions
SH IGB 63 66-85 Sensor Bracket for IGB
this Sensor Bracket is for mounting sensor MFS T2 3,7 for monitoring 2 positions
ASN SH 10 Sensor Bracket
enables the integration of sensors at nippers bodies with magnetic blades for sensing the open and closed position of the nipper blade
more safety for degating
sensors can be added easily
Accessories:
Sensor MFS T2 3,7(Part No. 1808-30-00)
ASN SH 20 Sensor Bracket
enables the integration of sensors at nippers bodies with magnetic blades for sensing the open and closed position of the nipper blade
more safety for degating
sensors can be added easily
Accessories:
Sensor MFS T2 3,7(Part No. 1808-30-00)
ASN SH 30 Sensor Bracket
enables the integration of sensors at nippers bodies with magnetic blades for sensing the open and closed position of the nipper blade
more safety for degating
sensors can be added easily
Accessories:
Sensor MFS T2 3,7(Part No. 1808-30-00)
ASN SH 50 Sensor Bracket
enables the integration of sensors at nippers bodies with magnetic blades for sensing the open and closed position of the nipper blade
more safety for degating
sensors can be added easily
Accessories:
Sensor MFS T2 3,7(Part No. 1808-30-00)
KHR-S 20-60 Blade Holder, swivelling
for precise separa-tion of film gates - the blade is pressed on the parttwo positions can be monitoreddouble-acting, piston Ø 12 mmoptionally: blade can be heated by commercially available hea-ting cartridge (Ø 6,5mm » maximum air pressure is 6 bar, use dry and filtered air only » see application exampleAccessories e.g.: Sensor MFS T2 (Part No. 1-808-30-00)
HUE 20-50-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-30-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-75-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-100-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-30-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-50-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-75-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-100-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-125-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-30-20-X-25-25-14 Slide Unit with Sliding Guide on Profile
e.g. for
compacting plastic parts or for pushing active elements (such as nippers,
gripper fingers, grippers etc.) against the plastic
partflexible mounting optionsnew
sliding guidefree from floating due to springloaded
sliding elementswear is compensated by
springend positions of cylinders can be
monitoredmounting material fits for profile systemsclamping
diameter suitable for the Robot Hand Kitcan absorb
lateral forces and momentsdouble-acting
cylindercan be combined individually with other elements
from the Robot Hand Kit such as HUE, DKZmaximum air
pressure is 6 bar, use dry and filtered air
onlyAccessories
e.g.:Sensor ICS 8 for
monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer
DB
HUE G 20-30-20-JU-40-40-20 Slide Unit with Sliding Guide on Profile
e.g. for
compacting plastic parts or for pushing active elements (such as nippers,
gripper fingers, grippers etc.) against the plastic
partflexible mounting optionsnew
sliding guidefree from floating due to springloaded
sliding elementswear is compensated by
springend positions of cylinders can be
monitoredmounting material fits for profile systemsclamping
diameter suitable for the Robot Hand Kitcan absorb
lateral forces and momentsdouble-acting
cylindercan be combined individually with other elements
from the Robot Hand Kit such as HUE, DKZmaximum air
pressure is 6 bar, use dry and filtered air
onlyAccessories
e.g.:Sensor ICS 8 for
monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer
DB
HUE X 25-30-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-50-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-75-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-100-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-125-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
ZTE 20 V Docking Finger
e.g. for safe and positionally accurate centering of the EOAT in the tool
for absolute accuracy
high holding force
powerful, pneumatic centering unit (ZTE V + ZBU V)
compact design
with a teachable sensor, the locked and unlocked position can be monitored
single-acting
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Docking Connector ZBU V
Sensor MFS T2 (Part No. 1-808-30-00)
Sensor Bracket GRF SH AL
ZTE 30 V Docking Finger
e.g. for safe and positionally accurate centering of the EOAT in the tool
for absolute accuracy
high holding force
powerful, pneumatic centering unit (ZTE V + ZBU V)
compact design
with a teachable sensor, the locked and unlocked position can be monitored
single-acting
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Docking Connector ZBU V
Sensor MFS T2 (Part No. 1-808-30-00)
Sensor Bracket GRF SH AL
ZHG 14-12-10 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 14-12-10 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHG 20-10 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHG 20-20 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 20-10 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 20-20 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
HUS 32-30-20 Double Stroke Unit for Vacuum Cups
Double Stroke Unit for Vacuum Cups with feeding and demoulding stroke, e.g. for demoulding bumperslocked against rotationend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Vacuum and Special Vacuum Cups (chapter 200 and 224)Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
SFP 20 Stacking Guide, Precise
e.g. for monitored „probing“ on tool (ejector side) or magazineinductive monitoringincreases the safety of the robot handsensor (3-pin, with 2m cable) includedfor precise workeasy to useup to three positions can be monitored:1x via inductive sensor (included)2x via magnetic field sensor (see accessories)endurance test: two million cycles completed without any errorAccessories e.g.:Sensor MFS T2 (Part No. 1-808-30-00)Sensor Bracket GRF SH 20 AL
SF 20 Stacking Guide
e.g. for „probing“ on tool (ejector side) or magazineincreases the security of the robot handfor precise workeasy to useAccessories e.g.:Sensor MFS T2 (Part No. 1808-30-00)Sensor Bracket GRF SH 20 AL
SFP 20 NC Stacking Guide, Precise
e.g. for monitored „probing“ on tool (ejector side) or magazineinductive monitoringincreases the safety of the robot handsensor (3-pin, with 2m cable) includedfor precise workeasy to useup to three positions can be monitored:1x via inductive sensor (included)2x via magnetic field sensor (see accessories)endurance test: two million cycles completed without any errorAccessories e.g.:Sensor MFS T2 (Part No. 1-808-30-00)Sensor Bracket GRF SH 20 AL
VHE 20 Vacuum Stroke Unit
e.g. for extracting of layerstwo functions:1. suction2. back strokejust one vacuum circle neededspring-loaded slipping forwardreturn stroke by pressure differenceholding force is depending on vacuum and diameter of vacuum cupreturn stroke depends on the vacuum levelmaximum air pressure is 6 bar, use dry and filtered air only
VHE 20 VG Vacuum Stroke Unit, non-rotating
e.g. for extracting of layerstwo functions:1. suction2. back strokejust one vacuum circle neededspring-loaded slipping forwardreturn stroke by pressure differenceholding force is depending on vacuum and diameter of vacuum cupreturn stroke depends on the vacuum levelmaximum air pressure is 6 bar, use dry and filtered air only
ZHS 20-30 Stroke Unit for Vacuum Cups
for gripping sidewise, e.g. for diagonal feeding of vacuum cupssingle-acting cylinder:air pressure - moving forwardspring - moving backwardsrequired accessories:Adapter with female thread:AVI 8-1/8-1/8 (Part No. 1-290-77-00) for vacuum cups with 1/8“ connection threadorAVI 8-1/4-1/8 (Part No. 1-290-79-00) for vacuum cups with 1/4“ connection threadmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor MFS T2 3,7 (Part No. 1-808-30-00)Sensor Bracket GFR SH 20 ALSensor ICS 8 (Part No. 1-808-36-00)Sensor Bracket GRF-SH20-ICS
ZHS 20-30 VG Stroke Unit for Vacuum Cups, non-rotating
for gripping sidewise, e.g. for diagonal feeding of vacuum cupssingle-acting cylinder:air pressure - moving forwardspring - moving backwardsrequired accessories:Adapter with female thread:AVI 8-1/8-1/8 (Part No. 1-290-77-00) for vacuum cups with 1/8“ connection threadorAVI 8-1/4-1/8 (Part No. 1-290-79-00) for vacuum cups with 1/4“ connection threadmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor MFS T2 3,7 (Part No. 1-808-30-00)Sensor Bracket GFR SH 20 ALSensor ICS 8 (Part No. 1-808-36-00)Sensor Bracket GRF-SH20-ICS
ASY-3-3-4 Adapter Y-Form
Y-adapter with one female socket connector (4 pins) and two male plug connectors (3 pins)
1x M8 4-pin female, socket
2x M8 3-pin male, plug
the signals of a sensor (4-pin) with two output signals can be divided into two individual signals (3-pin), e.g. MFS T2 3.7
MFS T2 3,7 Magnetic Field Sensor, 2 Acting Points, teachable
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY
ICS 8 Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3
ICS 8 NPN Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3