Gripper Fingers
Filter
–
Filter
18 items
GRF 35° / Gripper Finger
e.g. recommended if parts stick
35° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 95° / Gripper Finger
e.g. recommended if parts stick
95° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 95° EP / Gripper Finger with EP covering
e.g. recommended if parts stick and a gentle grip is needed
95° gripping angle
end positions can be monitored optionally end positions can be monitored optionallyextendable with extension tube VLR
single acting/spring return
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GFD 90 / Double Action, Cam Locking Gripper Finger
Version GFD:
Integrated self-locking: gripper finger snaps into the closed position (90 °)
double-acting gripper finger
gripper finger opens when unlocking is subjected to air pressure
end positions can be monitored
adjustable holding bracket included
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Version GFD FS:
In case of complete pressure loss, a minimum closing force is mechanically ensured. The GFD FS automatically closes into self-propelled position by spring.
FS = closing by spring
gripper finger opens when unlocking is subjected to air pressure
end positions can be monitored
adjustable holding bracket included
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Extension Tube VLR
GRW 35° / Gripper Finger
e.g. recommended if parts stick
horizontal finger-design
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 90° / Gripper Finger
e.g. recommended if parts stick
90° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 35° P / Gripper Finger with Precision Monitoring
E.g. recommended if parts stick and part-present monitoring to be possible at once35° gripping angle inductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR
GRF 95° / Gripper Finger with Precision Monitoring
E.g. recommended if parts stick and part-present monitoring to be possible at once95° gripping angle inductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR
GRF 95° EP / Gripper Finger w. EP covering and Precision Monitoring
E.g. recommended if parts stick, part-present monitoring to be possible at once and a gentle grip is needed95° gripping angle contact area coated with EP Coatinginductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR
GRF SH AL / Sensor Mounting Bracket, made of Aluminium
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH ICS / Sensor Mounting Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
QGR 20 / Crosswise Gripper
e.g. for gripping or fixing sidewise
Pressure Force: 80 N
in combination with pressure plates DPL for frictional gripping
space-saving stroke for vacuum cups (see application example)
threads can be reduced by reducing nipple RNK
space-saving, compact design
flexible usage
small, compact design
for farious applications
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Pressure Plates DST
Vacuum Cups VS
Reducing Nipple RNK
PMG / Pneumatic Magnetic Gripper
E.g. for handling small ferromagnetic workpiecessingle-acting magnetic gripperend position can be monitoredcontour pieces for centering can simply be screwed onmagnetic gripper is depressurized in the holding positionif compressed air is applied, the held workpiece is bracedthread on the head (M20x1.5) allows easy attachment of individual contoursmaximum air pressure is 6 bar, use dry and filtered air onlyThe information given on the adhesive force was determined by pulling the magnet vertically off a 20 mm thick, flat ground steel plate St37 at room temperature. A deviation of up to -10% compared to the specified value is possible in exceptional cases. In general, however, this value is exceeded.
ANS PA / Gripper Holding Bracket
workpieces can be supported by holding bracket
ANS 10 PA
for usage with Centering Pin ZTB
centered article can be placed on the bracket
ANS 14/20/30 PA
for usage with Gripper Fingers GRF
GRF in working position pushes workpiece against the bracket and fixes it
ZTS PA / Gripper Finger Guide (for GRF ...)
the guide is placed over the gripper finger for protecting the part during retrieval
suitable in combination with Gripper Finger GRF 95°
ANS 20 PA EP / Gripper Holding Bracket, with EP coating
workpieces can be gently supported on the holding bracket
maximizes the coated contact surfaces in combination with GRF 95 ° EP and GRF 95 ° EP P
closed finger presses the article against the holding bracket
allows gentle gripping of the workpiece
with EP coating shore hardness 90, blue
ANS PA K / Gripper Holding Bracket, convex
curved workpieces can be selectively supported on the holding bracket
allows gentle gripping of the workpiece
closed finger presses the article against the holding bracket
ANS AL EP CS / Holding Bracket with EP coating and monitoring
Application: Holding Bracket piece with integrated query for checking the presence of partsmade of anodized aluminumthe part that comes into contact with the article is EP-coatedprecision query using inductive initiator, with 3-pin plug