Needle Gripper
Filter
–
Filter
15 items
NGR X 16-10 / Needle Gripper for X-Profile
Needle Gripper for mounting directly to the X-Profile
for secure gripping of fabrics, two needle grippers should be used, working in the opposite direction
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12 / Needle Gripper
Needle Gripper with 4 needles at which the magazine bar or centring pin can immerse
maximum immersion depth 20 mm
suitable for handling textiles, fabrics or other limp materials that can be penetrated
double-acting cylinder
piston diameter 12 mm
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12-6 / Needle Gripper with 6 Needles, adjustable
infinitely adjustable Needle Gripper with 6 needles
penetration depth infinitely adjustable via adjusting screw
easy to use
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12 D / Needle Gripper with Through Hole
Standard Needle Gripper with 4 needles at which the magazine bar or centring pin can completely submerge
suitable for handling textiles, fabrics or other limp materials that can be penetrated
two double-acting cylinders
piston diameter 12 mm
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12-10 D / Needle Gripper with covered Contact Area
special Needle Gripper with 10 needles designed for handling fibre-reinforced composites (Organo-Sheets) and similar adhesive materials
specially designed contact surface for stripping off bonds
contact surface made of PTFE
easy exchangeable contact surface
different connections possible
stroke positions can be monitored
stepless adjustment of the penetration depth
2x5 needles with 2mm diameter each
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Draw Tube 20x100 NGR 12-10 D
Sensor ICS 8
Draw Tube 20x100 NGR 12-10 D
special draw tube for NGR 12-10 D
integrates NGR 12-10 D to the Robot Hand Kit (EOAT)
GG-20-NGR / Spring compensated Gripper Arm for NGR 12-10 D
spring compensated gripper arm for NGR 12-10 D
integrates NGR 12-10 D to the Robot Hand Kit (EOAT)
NGR 12 DL / Needle Gripper with Through Hole, Light Weight Version
Light Weight Needle Gripper with 4 needles at which the magazine bar or centring pin can completely submerge
identical function as NGR 12 D
37% weight reduction compared to NGR 12 D
partitions made of Polyamide
suitable for handling textiles, fabrics or other limp materials that can be penetrated
body made of Aluminium
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12-8 DK / Needle Gripper, 8 Needles, compact
Needle Gripper with 8 needles for more contact area at which the magazine bar or centring pin can completely submergesuitable for handling textiles, fabrics or other limp materials that can be penetratedtwo double-acting cylinderspiston diameter 12 mmbody made of Aluminiummaximum air pressure is 6 bar, use dry and filtered air only
NGR 12-8 D / Needle Gripper, 8 Needles, with Through Hole
Needle Gripper with 8 needles for more contact area at which the magazine bar or centring pin can completely submerge
suitable for handling textiles, fabrics or other limp materials that can be penetrated
two double-acting cylinders
piston diameter 12 mm
maximum air pressure is 6 bar, use dry and filtered air only
NGR 16-18 EZ / Needle Gripper, compact, adjustable
suitable for separating thin and limp materials without forcing through or the needles to grip several layers
18 extra-thin needles with a diameter of 0.7 mm for a secure hold
needle depth is adjustable from 0-1.8 mm (1.75 mm when using additional cover) in 0.025mm steps by thumb wheel
successfully completed endurance test with more than 2 million cycles
fitted for a blow-off tube to release cloth
easy to change needle package
sensor option for needle position
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Sensor MFS T2 3,7 (Art.-Nr. 1-808-30-00)
NGR 20-6-25 D / NGR for SMC (Sheet Molding Compound) Parts
e.g. for gripping fleeces, several limp layers, voluminous or sticky materials
6 crossed needles with a diameter of 1.5 mm
specially designed PTFE contact surface for stripping off bonds
contact surface made of PTFE: non-sticky and insulating
strokes can be adjusted continuously
basic and working position can be monitored
a cable suitable for the cable must be used
body made of anodised Aluminium
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Sensor MFS T2 3,7 (Part No. 1-808-30-00)
NGR 12-6 DS A / Needle Gripper, slim, adjustable, PTFE coated needles
special Needle Gripper for border areas or when needle packages are required
slim design with only 15 mm
2x 3 PTFE coated needles
cohesive needle fixation
seamless screwing to needle gripper packages with 6, 12, 18, 24 and more needles possible
air connections can be summarized with needle gripper packages
needle packages can be completely exchanged
penetration depth infinitely adjustable
fabrics are only penetrated in areas which are subsequently laminated
basic and working position of the needle packages can be monitored
maximum air pressure is 6 bar, use dry and filtered air only
NGR 12-6 DS A TP / Needle Gripper, slim, adjustable, 6 PTFE coated needles and contact area
special Needle Gripper for border areas or when needle packages are required slim design with only 15 mmwith changeable PTFE contact plate2x 3 PTFE coated needlescohesive needle fixationseamless screwing to needle gripper packages with 6, 12, 18, 24 and more needles possibleair connections can be summarized with needle gripper packagesneedle packages can be completely exchangedpenetration depth infinitely adjustablefabrics are only penetrated in areas which are subsequently laminatedbasic and working position of the needle packages can be monitoredmaximum air pressure is 6 bar, use dry and filtered air only