Parallel Gripper
Filter
–
Filter
8 items
PGR / Parallel Gripper
for precise gripping or inserting applications
PGR-plus: monitoring of two end-positions with MFS T2, not for PGR-plus 20
Sensor IRK 4
Accessories e.g.:
Blank Jaws AP-PGR
PU Pad + Glue KUG
Adaper AP PGR
Sensor IRK 4 for PGR-plus 32/40/50/64
Sensor IRK 4.4 for PGR-plus 20/25
GB PGR / Unmachined Jaws for Parallel Gripper
blank jaws for tcustomizing PGR-P jaws
fits for PGR-P and PGR-plus
made of Aluminium, smooth surface
Accessories e.g.:
PU Pad + Glue KUG
PGR-P / Parallel Gripper, pneumatic
e.g. for precise gripping or inserting applicationsload-bearing and low-play T-slot guide for safe and precise handling with high load ratings
drive concept for maximum gripping force
housing made of high-strength aluminum alloy for minimum weight and high stiffness
double acting: can be used as as external or internal gripper
small construction volume for minimal contours
centering possibilities on the gripping jaws
versatile adaptations for flexible assembling
power supply on two gripper sides possible; also hoseless direct connection possible
integrated permanent magnet for sensing end position (see accessories)
precise sensing of jaw position by adapting induction field sensors (see accessories)
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
GB-PGR - Unmachined Jaws (blanks) for Parallel GripperKUG - Glue and Polyurethane Pad: PU on the gripping surface increases the friction AP PGR - adaptation of the parallel gripper to the respective extension tube
MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each(Part No. 1-808-36-00)
IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors
PGR-PJ / Parallel Gripper with Printed Jaws
Fixed costs for grippers and jaws:A fixed price for each size for our parallel grippers including 3D printed jaws, that is the PGR-PJ. Design freedom:Precise
design of the jaws on the parts to be gripped. All we need is the
component data and we will take care of the component-specific creation
in the specified installation space.The pair of jaws is designed as a negative of your component. You determine the gripping area.For special gripping situations, tool requirements or clearances, we need your design data.Other dimensions or installation space studies are of course possible on request.Top quality:The
3D printed jaws are made of a high-strength and durable onyx material,
also reinforced with continuous fibers if necessary. These then cover
all applications of conventional jaws milled from aluminum.
the stated weight only refers to the parallel gripper without gripper jawsrendered image and data sheet serve as a general example for the product groupthe product photo shows the respective PGR-P which serves as the basis for the producte.g. for precise gripping or inserting applications
load-bearing and low-play T-slot guide for safe and precise handling with high load ratings
drive concept for maximum gripping force
housing made of high-strength aluminum alloy for minimum weight and high stiffness
double acting: can be used as as external or internal gripper
small construction volume for minimal contours
centering possibilities on the gripping jaws
versatile adaptations for flexible assembling
power supply on two gripper sides possible; also hoseless direct connection possible
integrated permanent magnet for sensing end position (see accessories)
precise sensing of jaw position by adapting induction field sensors (see accessories)
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
AP PGR - adaptation of the parallel gripper to the respective extension tube
MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each(Part No. 1-808-36-00)
IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors
PGR-PJ EP / Parallel Gripper with Printed Jaws and EP-Coating
Fixed costs for grippers and jaws with EP-coating:A fixed price for each size for our parallel grippers including 3D printed jaws and EP-coating, that is the PGR-PJ EP. Design freedom:Precise
design of the jaws on the parts to be gripped. All we need is the
component data and we will take care of the component-specific creation
in the specified installation space.The pair of jaws is designed as a negative of your component. You determine the gripping area.For special gripping situations, tool requirements or clearances, we need your design data.Other dimensions or installation space studies are of course possible on request.Top quality:The
3D printed jaws are made of a high-strength and durable onyx material,
also reinforced with continuous fibers if necessary. These then cover
all applications of conventional jaws milled from aluminum.
the stated weight only refers to the parallel gripper without gripper jawsrendered image and data sheet serve as a general example for the product groupthe product photo shows the respective PGR-P which serves as the basis for the producte.g. for precise gripping or inserting applications
load-bearing and low-play T-slot guide for safe and precise handling with high load ratings
drive concept for maximum gripping force
housing made of high-strength aluminum alloy for minimum weight and high stiffness
double acting: can be used as as external or internal gripper
small construction volume for minimal contours
centering possibilities on the gripping jaws
versatile adaptations for flexible assembling
power supply on two gripper sides possible; also hoseless direct connection possible
integrated permanent magnet for sensing end position (see accessories)
precise sensing of jaw position by adapting induction field sensors (see accessories)
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
AP PGR - adaptation of the parallel gripper to the respective extension tube
MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each(Part No. 1-808-36-00)
IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors
AS-P PGR-P / Sensor Bracket Precise for PGR-P
precise sensoring of jaw position by adaptive induction field sensors
Accessories e.g.:
Sensor IE AL K (Part No. 1-808-38-00)
AP PGR / Mounting Bracket for Parallel Gripper PGR
adapts Parallel Gripper on VLR extension tubes
can be used with or without bushings
suitable for PGR-P and PGR-plus
AP-P PGR / Adapter for mounting Parallel Grippers to profiles
Direct adaptation of the PGR-P or PGR to a profile PGR-P and PGR can be mounted lengthwise and crosswise to the profile, always symmetrically to the profile the adapter plate enables a direct connection to the respective profilecan be used with or without bushings suitable for PGR-P and PGR-plus