Sonder-Vacuum Cups
Filter
–
Filter
13 items
VAS SBR / Special Vacuum Cup, for rough surfaces, with Adapter
e.g. in the wood industry when handling raw chipboard
material: natural rubber
heat resistant up to 100 °C
nearly mark free
recommended for rough, grained surfaces
suction cup with adapter
suction cups can be changedconnection suction cup/adapterholding force is the theoretical value at -0.6 bar vacuum on a dry smooth and flat surface, there is no safety factor built inpictures may differ
VSN SBR / Special Suction Cup, without Adapter
material: natural rubber
heat resistant up to 100 °C
recommended for rough, grained surfaces
suction cup can be mounted on existing vacuum cups VAS SBR or with adapters
Accessories e.g.:
suction cup adapter
VS O 2 / Suction Cup - oval, 2 Bellows, with Adapter
for demoulding tasks where high holding forces are needed
for gripping long articles
HE = High Temperature Polyurathanesuction cups are vulcanised to the nipple
VS 1 PN / Vacuum Cup for sheet metal, with Adapter
specially adapted to the sheet metal handling
speciall inner structure prevents buckling or deep drawing, even with thin sheets (up to approx. 0.5 mm thick) or aluminum sheets
soft, conformable sealing lip especially suitable for flat or slightly curved workpieces with a smooth or slightly rough textured surface
PN = Perbunan (color: blue)
vulcanized nipple
VS 1 E / Vacuum Cup made of ED
when good holding force and exact positioning are needed
applicable to curved surfaces
suitable for sheet metal and oily surfaces
prevents deep drawing and minimizes dents
suction cup made of Elastodur
shore hardness: 85 °Sh
nipple made of Aluminiumsuction cup and adapter are screwed together
VS N3 A / Vacuum Cups Nitril, antistatic „Micro Series“
antistatic Vacuum Cups for the Micro Series
to avoid electrical charging and rapid discharge
Versions with 1, 2 and 3 bellows available
VS ... N3 A: complete vacuum cup: suction cup with mounted adapters
VN N3 A / Suction Cups Nitril, antistatic „Micro Series“
antistatic Vacuum Cups for the Micro Seriesto avoid electrical charging and rapid discharge Versions with 1, 2 and 3 bellows availableVN ... N3 A: suction cup without adapter
VS 2 2K / 2-Component Vacuum Cup - 2 Bellows, with Adapter
for high sealing, e.g. on grained, rough, uneven surfaces
2 bellows to compensate for unevenness and textured surfaces
temperature range +10°C to +50°C (higher temperatures temporary possible)
suction cup with adapter
suction cups can be changedØ70: adapter is molded into the cup Ø50 and Ø70 adapters have to be reduced from 3/8 to 1/4 by using PDN 3/8-1/4 (Part No. 1-858-18-00)Bellow and lip have different degrees of hardnessoptimal suction stabilityvery soft and flexible sealing lipShore Hardness A: 30 (lip very soft), 60 (bowl medium soft)holding force is the theoretical value at -0.6 bar vacuum on a dry smooth and flat surface, there is no safety factor built in
VN 2 2K / 2-Component Suction Cup - 2 Bellows, without Adapter
high sealing on grained, rough, uneven surfaces
2 bellows to compensate for unevenness and textured surfaces
temperature range +10°C to +50°C (higher temperatures temporary possible)
suction cup can be mounted on existing vacuum cups VS 2 2K or with adaptersBellow and lip have different degrees of hardnessoptimal suction stability
very soft and flexible sealing lip
Shore Hardness A: 30 (lip very soft), 60 (bowl medium soft)
Accessories e.g.:
suction cup adapter
VS 3 2K / 2-Component Vacuum Cup - 3 Bellows, with Adapter
for high sealing, e.g. on grained, rough, strong uneven surfaces
3 bellows to compensate for strong unevenness and textured surfaces
temperature range +10°C to +50°C (higher temperatures temporary possible)
suction cup with adapter
suction cups can be changedØ70: adapter is molded into the cup Ø50 and Ø70 adapters have to be reduced from 3/8 to 1/4 by using PDN 3/8-1/4 (Part No. 1-858-18-00)Bellow and lip have different degrees of hardnessoptimal suction stabilityvery soft and flexible sealing lipShore Hardness A: 30 (lip very soft), 60 (bowl medium soft)holding force is the theoretical value at -0.6 bar vacuum on a dry smooth and flat surface, there is no safety factor built in
VN 3 2K / 2-Component Suction Cup - 3 Bellows, without Adapter
high sealing on grained, rough, uneven surfaces
3 bellows to compensate for strong unevenness and textured surfaces
temperature range +10°C to +50°C (higher temperatures temporary possible)
suction cup can be mounted on existing vacuum cups VS 2 2K or with adapters
Bellow and lip have different degrees of hardnessoptimal suction stabilityvery soft and flexible sealing lipShore Hardness A: 30 (lip very soft), 60 (bowl medium soft)
Accessories e.g.:
suction cup adapter
VS 1 NK / Vacuum Cup Natural Rubber - 1 Bellow, with Adapter
e.g. suitable for very short cycle time
NK = natural rubber
exact positioning
higher load capacity
no twisting
suction cups are vulcanised onto nipples (exception: VS 1-34 NK 4)
VS HT+ / Vacuum Cup, heat-resistant up to 300°C, with Adapter
special vacuum cup for demoulding at high temperatures
2 bellows for compensating uneven surfaces
temperature range from -20°C to +300°C
resistant to:chemicals, chloric solvents, lubrication solvents, aromatic/aliphatic hydrocarbons
Accessories e.g.:
Adapter PDN:
for VS 2-40 HT+: Part No. 1-858-12-00
for VS 2-40 HT+: Part No. 1-858-18-00