Special Elements
Filter
–
Filter
22 items
GGE 14...F / Gripper Arm for Photoelectric Sensor LES 6
sensor can be adjusted continuously at any angle
LES 6 / Photoelectric Sensor - Compact
optical part present control
with plug connection
connection M8 4-pin
NPN version on demand
Accessories e.g.:
Gripper Arms for Sensor GGE 14 F
connector with cable KG 8-4
elbow connector KW 8-4
LRS 18 / Photoelectric Sensor - Cylindric
optical part present control
mounting diameter 20mm
connection M12 4-pin
Accessories e.g.:
connector with cable KG 18
elbow connector KW 18
VTY / Splitter Y-Form
2 way splitter in Y-form, screw-on
1x male, 4-pins, M8x1 (plug with external thread), straight
2x female, 3-pins, M8x1 (union nut with internal thread), straight
space saving
up to 12 inputs in 1 EVM 8-6-4
ASY / Adapter Y-Form
Y-adapter with one female socket connector (4 pins) and two male plug connectors (3 pins)
1x M8 4-pin female, socket
2x M8 3-pin male, plug
the signals of a sensor (4-pin) with two output signals can be divided into two individual signals (3-pin), e.g. MFS T2 3.7
RPL / Relay Board
for summarizing signals
voltage 22–24V
PNP switching, also suitable for NPN
for NPN, simply swap the supply voltage (+/-)
RPLG / Relay Board with Enclosure
for summarizing signals
voltage 22–24V
PNP switching, also suitable for NPN
for NPN, simply swap the supply voltage (+/-)
KK / Junction Box
this compact junction box is for connecting up to 4 sensors in a series or individually (observe manufacturer instructions of the sensor!)
PNP switching, also suitable for NPN
for NPN, simply swap the supply voltage (+/-)
LPL / Logical Board, LPL-G(-S) / Logical Board with Enclosure
Unfortunately, the previous version of the Logical Board LPL is no longer available. The article will be replaced by an article with the same function and pricing. The product description also remains the same, only the article number changes. The successor items are expected to be available from October 2023Part No. 1-805-17-00 is replaced by Part No. 1-805-37-00Part No. 1-805-18-00 is replaced by Part No. 1-805-38-00Part No. 1-805-19-00 is replaced by Part No. 1-805-39-00Logical Board for summarizing input signals
up to 8 inputs and 4 outputs can be assigned
inputs can be controlled with +24V driven (for initiators with PNP output) or 0V (for initiators with NPN output)
outputs can be used as PNP output (active + 24V, otherwise open) or NPN output (active 0V, otherwise open)
the state of the inputs and outputs as well as the normal state of the board are indicated by LEDs; this allows a permanent overview of the operation state of the system
by default, there are 4 functions programmed and selectable via DIP switch (other functions on request)
Accessories e.g.:
connector KG 12-8
SEO 5 / Mechanical Switch without Cable
changeover switch with switching flag
3 plug connections for cable lugs
SEO 10 / Mechanical Switch without Cable
changeover switch with switching flag
3 screw connections
Accessories e.g.:
housing GEO 10
GEO 10 / Housing for Mechanical Switch SEO 10
SEO 10 can be mounted using the GEO 10 housing
IRK 4 / Proximity Switch for Parallel Gripper PGR-P and PGR
inductive proximity switch with a 0.8mm range
it senses the open/close positions of gripper jaws
IRK 4 suitable for: PGR-P/PGR 32, 40, 50, 64
IRK 4.4 suitable for: PGR 20, 25
IEK 8 / IES 8 / Sensor
inductive proximity switch
sensor is used e.g. for standard monitoring on ASS grippers (GRZ 20-16, GRZ 32, GRZ 10-12) and stroke units (HEU / HEU-L)
PNP and NPN switching available
Initiator can be fixed with an M3 screw
connection M8 3-pinM3 hexagon socket screw not included
EVM / Bus Module
passive distributor
4, 6, 8, 10 or 12 inputs
for connecting initiators or part controls
flexible cable
with M8 3-pin connections
Execption: EVM 8-6-4 M8 4-pin
MFS T2 3,7 / Sensor with two Acting Points „Teachable“
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY
ICS 8 / Sensor, C-Nut, Plug, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3
IE AL K / Proximity Switch
inductive proximity switch with a 0.8mm range
e.g. is used for monitoring tasks with parallel grippers (PGR-P) and Stacking Guide (SFP)
particularly compact rectangular design for usage in confined spaces
compact design
good visility of signals
high switching frequency