| Part No.: | 1-450-44-00 |
Part No.:
1-450-44-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
GRF 20-95 VA P2 Gripper Finger 90° with Precision Monitoring | 1-450-44-00 | Gripping angle: 95°, : 20 mm, Closing Force: 45 N |
E.g. recommended if parts stick and part-present monitoring to be possible at once
- 95° gripping angle
- inductive query allows part-present control
- sensor (3-pin, with 2m cable, PNP closing contact) included
- air connection sidewise can be positioned in 3x120° steps
- switching point set at 91°, can be adjusted if necessary
- additional monitoring of end positions optionally
- single acting/spring return
- closing force measured at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
- Holding Bracket ANS
- Mounting Bracket GRF SH AL
- Sensor MFS T2 3,7 (Part No. 1808-30-00)
- Mounting Bracket GRF SH MFS
- Sensor ICS 8 (Part No. 1-808-36-00)
- Extension Tube VLR
| Active principle: | single-acting |
|---|---|
| Cable length: | 2 m |
| Coating: | - |
| Connection: | open cable head |
| Connection thread: | M17x1 |
| Contact: | closing contact |
| Hose connection thread: | M3 |
| Integrated magnet: | yes |
| Material: | Aluminium |
| Monitoring: | yes |
| Poles: | 3 |
| Self-locking: | no |
| Sensor type: | inductive |
| Signal output: | PNP |
| Spring: | opening |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GRF SH 20 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH 20 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
ZTS 20 PA Gripper Finger Guide made of Polyamide
the guide is placed over the gripper finger for protecting the part during retrieval
suitable in combination with Gripper Finger GRF 95°
ANS 20 PA Holding Bracket made of Polyamide
workpieces can be supported by holding bracket
ANS 10 PA
for usage with Centering Pin ZTB
centered article can be placed on the bracket
ANS 14/20/30 PA
for usage with Gripper Fingers GRF
GRF in working position pushes workpiece against the bracket and fixes it
ANS 20 PA EP S Holding Bracket made of Polyamide with EP Coating
workpieces can be gently supported on the holding bracket
maximizes the coated contact surfaces in combination with GRF 95 ° EP and GRF 95 ° EP P
closed finger presses the article against the holding bracket
allows gentle gripping of the workpiece
with EP coating shore hardness 90, blue
ANS 20 PA EP B Holding Bracket made of Polyamide with EP Coating
workpieces can be gently supported on the holding bracket
maximizes the coated contact surfaces in combination with GRF 95 ° EP and GRF 95 ° EP P
closed finger presses the article against the holding bracket
allows gentle gripping of the workpiece
with EP coating shore hardness 90, blue
ANS 20 PA K Holding Bracket made of Polyamide, convex
curved workpieces can be selectively supported on the holding bracket
allows gentle gripping of the workpiece
closed finger presses the article against the holding bracket
ANS 20 PA K EP Holding Bracket made of PA, convex, w. EP Coating
curved workpieces can be selectively supported on the holding bracket
allows gentle gripping of the workpiece
closed finger presses the article against the holding bracket
VLR 20-50 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-100 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-150 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR