| Part No.: | 1-490-51-00 |
Part No.:
1-490-51-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
ANS 14 PA EP S Holding Bracket made of Polyamide with EP Coating | 1-490-50-00 | : schmal, Compatible to: GRF 14, Clamping Ø: 14 mm, Coating: EP Shore 90 | |
|
|
ANS 20 PA EP S Holding Bracket made of Polyamide with EP Coating | 1-490-51-00 | : schmal, Compatible to: GRF 20, Clamping Ø: 20 mm, Coating: EP Shore 90 | |
|
ANS 20 PA EP B Holding Bracket made of Polyamide with EP Coating | 1-490-52-00 | : breit, Compatible to: GRF 20, Clamping Ø: 20 mm, Coating: EP Shore 90 | |
|
ANS 30 PA EP B Holding Bracket made of Polyamide with EP Coating | 1-490-53-00 | : breit, Compatible to: GRF 30, Clamping Ø: 30 mm, Coating: EP Shore 90 |
- workpieces can be gently supported on the holding bracket
- maximizes the coated contact surfaces in combination with GRF 95 ° EP and GRF 95 ° EP P
- closed finger presses the article against the holding bracket
- allows gentle gripping of the workpiece
- with EP coating shore hardness 90, blue
| Material: | Polyamide |
|---|---|
| Weight: | 21.29 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GRF 20-35 VA Gripper Finger 35°
e.g. recommended if parts stick
35° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 20-95 VA Gripper Finger 95°
e.g. recommended if parts stick
95° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 20-95 VA EP Gripper Finger 95°, with EP Coating
e.g. recommended if parts stick and a gentle grip is needed
95° gripping angle
end positions can be monitored optionally end positions can be monitored optionallyextendable with extension tube VLR
single acting/spring return
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
GRF 20-90 VA Gripper Finger 90°
e.g. recommended if parts stick
90° gripping angle
end positions can be monitored optionally
closing force measured at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Holding Bracket ANS
Sensor Mounting Bracket GRF SH AL
Sensor MFS T2 3,7 (Part No. 1808-30-00)
Sensor Mounting Bracket GRF SH MFS
Sensor ICS 8 (Art.-Nr. 1-808-36-00)
Extension Tube VLR
Gripper Finger 35° with Precision Monitoring
E.g. recommended if parts stick and part-present monitoring to be possible at once35° gripping angle inductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR
GRF 20-95 VA P2 Gripper Finger 90° with Precision Monitoring
E.g. recommended if parts stick and part-present monitoring to be possible at once95° gripping angle inductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR
GRF 20-95 VA P2 EP Gripper Finger 90° w. Prec. Monitoring + EP-Coat.
E.g. recommended if parts stick, part-present monitoring to be possible at once and a gentle grip is needed95° gripping angle contact area coated with EP Coatinginductive query allows part-present controlsensor (3-pin, with 2m cable, PNP closing contact) includedair connection sidewise can be positioned in 3x120° steps switching point set at 91°, can be adjusted if necessaryadditional monitoring of end positions optionallysingle acting/spring returnclosing force measured at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Holding Bracket ANSMounting Bracket GRF SH ALSensor MFS T2 3,7 (Part No. 1808-30-00)Mounting Bracket GRF SH MFSSensor ICS 8 (Part No. 1-808-36-00)Extension Tube VLR