- 3-pin proximity switch for monitoring an end-position at short stroke cylinders
- suitable for C-nut
- connection M8 3-pin
- suitable for e.g.:
- Short Stroke Cylinder KHZ
- Special Cylinder SZD
- Grippers with Stroke HUZ / HUP P
- Sliding Units HUE
Accessories e.g.:
- connector KG 8-3
Cable length: | - |
---|---|
Compatible to: | KG 8-3 |
Connection: | - |
Connection thread: | M8x1 |
Contact: | closing contact |
Internal voltage drop: | max. 0,8V at 10 mA ( max. 2V at 40 mA) |
Leakage current: | max. 100 microamps at 24 VDC |
Material: | Plastic material |
Power consumption: | max. 10 mA |
Range: | - |
Supply voltage: | 4,5 to 28 VDC |
max. power: | max. 40 mA |
Weight: | 11 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GRF SH 20 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
GRF SH 30 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
GRF SH 14 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
KHZ 12-5 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 12-10 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 20-5 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 20-10 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 20-20 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 20-30 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 32-5 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 32-10 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 32-20 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 32-30 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
KHZ 32-50 DA Short Stroke Cylinder
universally applicable, double-acting Short Stroke Cylinderend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 12-10-55A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 12-20-55A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 20-10-80A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 20-20-80A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 20-30-80A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 20-40-80A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 20-50-80A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 32-10-120A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 32-20-120A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 32-30-120A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 32-40-120A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
SZD 32-50-120A Special Short Stroke Cylinder
double-acting Special Short Stroke Cylinder with yoke plate for gripper arms for vacuum cups, such as GSE, GGE, etc.special designs of the yoke plate on requestend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Gripper Arms for Short Stroke Cylinder GAZ and GAZ S
HUE 20-50-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-30-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-75-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-100-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-30-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-50-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-75-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-100-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-125-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-30-20-X-25-25-14 Slide Unit with Sliding Guide on Profile
e.g. for
compacting plastic parts or for pushing active elements (such as nippers,
gripper fingers, grippers etc.) against the plastic
partflexible mounting optionsnew
sliding guidefree from floating due to springloaded
sliding elementswear is compensated by
springend positions of cylinders can be
monitoredmounting material fits for profile systemsclamping
diameter suitable for the Robot Hand Kitcan absorb
lateral forces and momentsdouble-acting
cylindercan be combined individually with other elements
from the Robot Hand Kit such as HUE, DKZmaximum air
pressure is 6 bar, use dry and filtered air
onlyAccessories
e.g.:Sensor ICS 8 for
monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer
DB
HUE G 20-30-20-JU-40-40-20 Slide Unit with Sliding Guide on Profile
e.g. for
compacting plastic parts or for pushing active elements (such as nippers,
gripper fingers, grippers etc.) against the plastic
partflexible mounting optionsnew
sliding guidefree from floating due to springloaded
sliding elementswear is compensated by
springend positions of cylinders can be
monitoredmounting material fits for profile systemsclamping
diameter suitable for the Robot Hand Kitcan absorb
lateral forces and momentsdouble-acting
cylindercan be combined individually with other elements
from the Robot Hand Kit such as HUE, DKZmaximum air
pressure is 6 bar, use dry and filtered air
onlyAccessories
e.g.:Sensor ICS 8 for
monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer
DB
HUE X 25-30-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-50-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-75-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-100-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-125-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
ZHG 14-12-10 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 14-12-10 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHG 20-10 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHG 20-20 Cutter Slide
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 20-10 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
ZHD 20-20 Cutter Slide, double-acting
e.g. in combination with nippers
articulated arm infinitely adjustableweight and cost optimized solution
end positions of cylinders can be monitored
Accessories e.g.:
Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
HUS 32-30-20 Double Stroke Unit for Vacuum Cups
Double Stroke Unit for Vacuum Cups with feeding and demoulding stroke, e.g. for demoulding bumperslocked against rotationend positions of cylinders can be monitoredmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Vacuum and Special Vacuum Cups (chapter 200 and 224)Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
SFP 20 Stacking Guide, Precise
e.g. for monitored „probing“ on tool (ejector side) or magazineinductive monitoringincreases the safety of the robot handsensor (3-pin, with 2m cable) includedfor precise workeasy to useup to three positions can be monitored:1x via inductive sensor (included)2x via magnetic field sensor (see accessories)endurance test: two million cycles completed without any errorAccessories e.g.:Sensor MFS T2 (Part No. 1-808-30-00)Sensor Bracket GRF SH 20 AL
SF 20 Stacking Guide
e.g. for „probing“ on tool (ejector side) or magazineincreases the security of the robot handfor precise workeasy to useAccessories e.g.:Sensor MFS T2 (Part No. 1808-30-00)Sensor Bracket GRF SH 20 AL
SFP 20 NC Stacking Guide, Precise
e.g. for monitored „probing“ on tool (ejector side) or magazineinductive monitoringincreases the safety of the robot handsensor (3-pin, with 2m cable) includedfor precise workeasy to useup to three positions can be monitored:1x via inductive sensor (included)2x via magnetic field sensor (see accessories)endurance test: two million cycles completed without any errorAccessories e.g.:Sensor MFS T2 (Part No. 1-808-30-00)Sensor Bracket GRF SH 20 AL
VHE 20 Vacuum Stroke Unit
e.g. for extracting of layerstwo functions:1. suction2. back strokejust one vacuum circle neededspring-loaded slipping forwardreturn stroke by pressure differenceholding force is depending on vacuum and diameter of vacuum cupreturn stroke depends on the vacuum levelmaximum air pressure is 6 bar, use dry and filtered air only
VHE 20 VG Vacuum Stroke Unit, non-rotating
e.g. for extracting of layerstwo functions:1. suction2. back strokejust one vacuum circle neededspring-loaded slipping forwardreturn stroke by pressure differenceholding force is depending on vacuum and diameter of vacuum cupreturn stroke depends on the vacuum levelmaximum air pressure is 6 bar, use dry and filtered air only
ZHS 20-30 Stroke Unit for Vacuum Cups
for gripping sidewise, e.g. for diagonal feeding of vacuum cupssingle-acting cylinder:air pressure - moving forwardspring - moving backwardsrequired accessories:Adapter with female thread:AVI 8-1/8-1/8 (Part No. 1-290-77-00) for vacuum cups with 1/8“ connection threadorAVI 8-1/4-1/8 (Part No. 1-290-79-00) for vacuum cups with 1/4“ connection threadmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor MFS T2 3,7 (Part No. 1-808-30-00)Sensor Bracket GFR SH 20 ALSensor ICS 8 (Part No. 1-808-36-00)Sensor Bracket GRF-SH20-ICS
ZHS 20-30 VG Stroke Unit for Vacuum Cups, non-rotating
for gripping sidewise, e.g. for diagonal feeding of vacuum cupssingle-acting cylinder:air pressure - moving forwardspring - moving backwardsrequired accessories:Adapter with female thread:AVI 8-1/8-1/8 (Part No. 1-290-77-00) for vacuum cups with 1/8“ connection threadorAVI 8-1/4-1/8 (Part No. 1-290-79-00) for vacuum cups with 1/4“ connection threadmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor MFS T2 3,7 (Part No. 1-808-30-00)Sensor Bracket GFR SH 20 ALSensor ICS 8 (Part No. 1-808-36-00)Sensor Bracket GRF-SH20-ICS
MFS T2 3,7 Magnetic Field Sensor, 2 Acting Points, teachable
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY