| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
VHE 20 Vacuum Stroke Unit | 1-775-00-00 | Stroke: 20 mm, : 62 mm, : no, : 16 mm | |
|
VHE 20 VG Vacuum Stroke Unit, non-rotating | 1-775-00-00-1 | Stroke: 20 mm, : 62 mm, : ja, : 16 mm |
- e.g. for extracting of layers
- two functions:
- 1. suction
- 2. back stroke
- just one vacuum circle needed
- spring-loaded slipping forward
- return stroke by pressure difference
- holding force is depending on vacuum and diameter of vacuum cup
- return stroke depends on the vacuum level
- maximum air pressure is 6 bar, use dry and filtered air only
| Active principle: | single-acting |
|---|---|
| Compatible to: | MFS T2 3,7; GRF SH 20 AL; ICS 8; GRF-SH20-ICS |
| Connection thread: | M17x1 |
| Gewinde Saugeranschluss: | G1/8″ |
| Hose connection thread: | G1/8″ |
| Material: | Aluminium |
| Monitoring: | optional |
| Piston Ø: | 16 mm |
| Spring: | coming out |
| Weight: | 48 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GRF SH 20 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH 20 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
VLR 20-50 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-100 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-150 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
MFS T2 3,7 Magnetic Field Sensor, 2 Acting Points, teachable
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY
ICS 8 Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3
ICS 8 NPN Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3