| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
SFP 20 Stacking Guide, Precise | 1-770-00-00 | Stroke: 20 mm, Piston Ø: 16 mm, : 20 mm, Spring: coming out, : 62 mm, Contact: closing contact | |
|
SFP 20 NC Stacking Guide, Precise | 1-772-00-00 | Stroke: 20 mm, Piston Ø: 16 mm, : 20 mm, Spring: coming out, : 62 mm, Contact: opening contact |
- e.g. for monitored „probing“ on tool (ejector side) or magazine
- inductive monitoring
- increases the safety of the robot hand
- sensor (3-pin, with 2m cable) included
- for precise work
- easy to use
- up to three positions can be monitored:
- 1x via inductive sensor (included)
- 2x via magnetic field sensor (see accessories)
- endurance test: two million cycles completed without any error
- Sensor MFS T2 (Part No. 1-808-30-00)
- Sensor Bracket GRF SH 20 AL
| Active principle: | single-acting |
|---|---|
| Cable length: | 2 m |
| Compatible to: | MFS T2 3,7; GRF SH 20 AL; ICS 8; GRF-SH20-ICS |
| Connection thread: | M17x1 |
| Hose connection thread: | G1/8″ |
| Material: | Aluminium |
| Monitoring: | yes |
| Poles: | 3 |
| Sensor type: | inductive |
| Signal output: | PNP |
| Werkstoff Kontaktfläche: | NBR geriffelt |
| Weight: | 129 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GRF SH 20 AL Sensor Bracket
for mounting a magnetic field sensor MFS T2 on the gripper finger (2 switching points teachable)
simple, robust clamping on the GRF
compact design
Accessories e.g.:
Sensor MFS T2 3,7(Part No. 1808-30-00)
GRF SH 20 ICS Sensor Bracket
for mounting a magnetic field sensor ICS on the gripper finger
for querying one end position of the gripper finger
by tightening the screw sensor mounting bracket and sensor itself are clamped on the finger
positioning freely adjustable
Accessories e.g.:
Sensor ICS 8 (Part No. 1-808-36-00)
VLR 20-50 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-100 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-150 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
MFS T2 3,7 Magnetic Field Sensor, 2 Acting Points, teachable
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY
ICS 8 Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3
ICS 8 NPN Initiator, C-Slot, M8
3-pin proximity switch for monitoring an end-position at short stroke cylinders
suitable for C-nut
connection M8 3-pin
suitable for e.g.:
Short Stroke Cylinder KHZ
Special Cylinder SZD
Grippers with Stroke HUZ / HUP P
Sliding Units HUE
Accessories e.g.:
connector KG 8-3
IE AL K Proximity Switch
inductive proximity switch with a 0.8mm range
e.g. is used for monitoring tasks with parallel grippers (PGR-P) and Stacking Guide (SFP)
particularly compact rectangular design for usage in confined spaces
compact design
good visility of signals
high switching frequency
IE AL K NPN Proximity Switch
inductive proximity switch with a 0.8mm range
e.g. is used for monitoring tasks with parallel grippers (PGR-P) and Stacking Guide (SFP)
particularly compact rectangular design for usage in confined spaces
compact design
good visility of signals
high switching frequency