Part No.: | 1-055-26-00 |
Part No.:
1-055-26-00
- specifically developed profile for part weight larger than 10 kg
- custom length on request
- special profile length larger than 2000 mm on request
- channel nut can be dropped in
Channels: | 4 |
---|---|
Compatible to: | GWP U; GWP EX U; PL-U; ADP; KKP; KKB-X-JU |
Core hole 1: | 5,0 mm (M6) |
Core hole 2: | 12,5 mm (M14x1,5) |
Material: | Aluminium |
Weight: | 5317.6 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GWP 5-20 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
ADP 2000 Profile Cover 2000 mm
e.g. to avoid cuttings falling into profiles in cutting stations
cover snaps into the profile channel
closes the profile channel and protects it against debris
fits in L, X and JU profile
WSL KG X 14 Long Angle Clamp with Swivel Head and Ball Joint
allows positioning of Gripper GRZ etc. in free angle
three-dimensional adjustability for stepless adjustment
three movable axes by angle arm and ball joint
maximum flexibility through freely adjustable angles
protection against misalignment
improved fixing
can be mounted directly on profiles
allows compact gripper design
VBT JU 120-120 T-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
Scope of Delivery:
3 channel nuts included
KPL V EU50-JU40 Cross Connector JU to Europrofile, reinforced
Clamp for combining X profile with Euro profile for small, light parts i.e. sensors
no drilling required
easy to use
form locking for X- and Europrofiles
enhances the capabilities of both profiles
bushing for Europrofil has to be added by customer
ADP 1000 Profile Cover 1000 mm
e.g. to avoid cuttings falling into profiles in cutting stations
cover snaps into the profile channel
closes the profile channel and protects it against debris
fits in L, X and JU profile
KKP 25-20 Cable Channel for profiles 2000 mm
for installing and hiding pneumatics and electrics at profiles
hose channel can be clipped easily to the profiles
compatible to L-, X- and JU-Profiles
only for stanionary machines like cutting stations
Attention: not for usage with EOAT (robot hand) due to acceleration
KKP 25-35 Cable Channel for profiles 2000 mm
for installing and hiding pneumatics and electrics at profiles
hose channel can be clipped easily to the profiles
compatible to L-, X- and JU-Profiles
only for stanionary machines like cutting stations
Attention: not for usage with EOAT (robot hand) due to acceleration
WSF X 10-40 U Flat Angle Clamp
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSF X 14-50 U Flat Angle Clamp
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSF X 20-60 U Flat Angle Clamp
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSF X M10-40 U Flat Angle Clamp with Thread
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSF X M14-50 U Flat Angle Clamp with Thread
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSF X M20-60 U Flat Angle Clamp with Thread
universal Angle Clamp for mounting gripper arms with thread (such as GAF M)
Version WSF U without thread: Gripper Arms can be put through and counter-tightened
Version WSF M U with thread: Gripper Arms can be screwd in
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSW M JU 20 Angle Clamp, mirrored
for a very stable connection between profiles and components
extra strong clamp
utilizes 2 channel nuts and wraps around the profile to minimize deflection (exception: WSW L 10)
Type WSW M
mirrored design of WSW
allows better setting options in a robot hand
WSW JU 20 Angle Clamp
for a very stable connection between profiles and components
extra strong clamp
utilizes 2 channel nuts and wraps around the profile to minimize deflection (exception: WSW L 10)
Type WSW M
mirrored design of WSW
allows better setting options in a robot hand
WSW JU 30 Angle Clamp
for a very stable connection between profiles and components
extra strong clamp
utilizes 2 channel nuts and wraps around the profile to minimize deflection (exception: WSW L 10)
Type WSW M
mirrored design of WSW
allows better setting options in a robot hand
WST JU 20 U BS Angle Clamp universal, Blue Scale
for exact mounting and replicable positioning of angles etc. due to
additional blue anodization and markings for exact positioninghas the advantage of many possible applications: can be mounted form fit or adjustable just one tool needed: hexagon socket screw keymounted directly on profileallows compact gripper designmore Blue Scale parts are available for WKA, GLA and GLA V
WSL L 6-25 U Angle Clamp universal, Micro Series
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL L 10-40 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL L+X 10-40 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL L 14-40 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 14-50 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 14-50 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 20-60 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 20-60 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL JU 20-70 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL JU 20-70 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 30-60 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL X 30-60 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL JU 30-70 U Long Angle Clamp universal
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL JU 30-70 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL G X 10-50 U Long Angle Clamp with Ball Joint
features an integrated ball joint that allows flexible angle adjustments for components
degrees of freedom can be adjusted stepless
can be mounted directly on profiles
allows compact gripper design
WSL G X 14-60 U Long Angle Clamp with Ball Joint
features an integrated ball joint that allows flexible angle adjustments for components
degrees of freedom can be adjusted stepless
can be mounted directly on profiles
allows compact gripper design
WSL G X 20-60 U Long Angle Clamp with Ball Joint
features an integrated ball joint that allows flexible angle adjustments for components
degrees of freedom can be adjusted stepless
can be mounted directly on profiles
allows compact gripper design
WSL GA X 10 Long Angle Clamp with Swivel Head
e.g. for mounting Gripper GRZ, vacuum cups etc. in an angle
degrees of freedom can be adjusted stepless
both directions non-rotating
can be mounted directly on profiles
allows compact gripper design
WSL GA X 14 Long Angle Clamp with Swivel Head
e.g. for mounting Gripper GRZ, vacuum cups etc. in an angle
degrees of freedom can be adjusted stepless
both directions non-rotating
can be mounted directly on profiles
allows compact gripper design
WSL GA X 20 Long Angle Clamp with Swivel Head
e.g. for mounting Gripper GRZ, vacuum cups etc. in an angle
degrees of freedom can be adjusted stepless
both directions non-rotating
can be mounted directly on profiles
allows compact gripper design
WSL GA JU 30 Long Angle Clamp with Swivel Head
e.g. for mounting Gripper GRZ, vacuum cups etc. in an angle
degrees of freedom can be adjusted stepless
both directions non-rotating
can be mounted directly on profiles
allows compact gripper design
WSL KG X 10 Long Angle Clamp with Swivel Head and Ball Joint
allows positioning of Gripper GRZ etc. in free angle
three-dimensional adjustability for stepless adjustment
three movable axes by angle arm and ball joint
maximum flexibility through freely adjustable angles
protection against misalignment
improved fixing
can be mounted directly on profiles
allows compact gripper design
WSL KG JU 20 Long Angle Clamp with Swivel Head and Ball Joint
allows positioning of Gripper GRZ etc. in free angle
three-dimensional adjustability for stepless adjustment
three movable axes by angle arm and ball joint
maximum flexibility through freely adjustable angles
protection against misalignment
improved fixing
can be mounted directly on profiles
allows compact gripper design
DKZ JU 20-50 Mounting Bar, centrical
allows a more flexible integration of swivelling blade holder KHR-Scan be easily mounted at the ends of profiles
KVB L 6 Cross Connector, Micro Series
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB L+X 10 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB L 14 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB X 14 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB X 20 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB JU 20 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB X 30 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB JU 30 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB G X 10 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G X 14 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G JU 14 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G X 20 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G JU 20 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KBV JU 40-40 Square Joint Connector
connects profiles in 90° to each other
no drilling necessary
after loosening two screws profiles can be moved in all directions
KPL D JU 40 Cross Joint Connector,form-locking, swiveling
connects profiles steplessly +/- 90° to each other
profile is connected on one side with positive locking
opposite side +/- 90° steplessly adjustable
KPL JU40-X25 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 40-40 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 80-X25 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 80-40 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 80-80 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 80-X50 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL JU 40-X50 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KV X 5 Clinch Nut
Profiles can be screwed at a 90 ° angle or at any other angle
one profile must be drilled (Ø A, depth C)
packing unit: 10 pieces
KV L 4 S: “S“ = counter sunk screw M4x8 for L-profile 18x10 mm
Accessories e.g.:
Step Drill STB
KV JU 6 Clinch Nut
Profiles can be screwed at a 90 ° angle or at any other angle
one profile must be drilled (Ø A, depth C)
packing unit: 10 pieces
KV L 4 S: “S“ = counter sunk screw M4x8 for L-profile 18x10 mm
Accessories e.g.:
Step Drill STB
SV JU 6 Butt Connector
for connecting profiles
packing unit: 10 pieces
one profile must be drilled
in the other profile a thread must be cut frontally
Butt Connector SV K is non-rotating by form locking
Accessories e.g.:
Step Drill STB
Tap Drill GB
WIV K 40 Angle Joint Connector 90°
reinforces profile connections in 90°
no need for additional works such as drilling or thread cutting
different models for X-, JU- and K-System, see product name
WIV K 80 Angle Joint Connector 90°
reinforces profile connections in 90°
no need for additional works such as drilling or thread cutting
different models for X-, JU- and K-System, see product name
EVB K 100 Corner Joint Plate
allows to connect profiles in angles of 90° / 100° / 110°/ 120° or 130°
exception: EVB X 100 allows 90° or 100° connections
no need for additional work like drilling or thread cutting
stable connection to expose profiles at an angle
SVB JU 40-40 Butt Connector
for connecting profiles in 90 °
four M5 threads have to be cut in the profile
butt connector is screwed to the front side of the profile to be connected, this unit is screwed into the groove of the other profile and can be adjusted
SVB JU 80-40-80-40 90° Connector, shiftable
for connecting profiles in 90 °
four M5 threads have to be cut in the profile
butt connector is screwed to the front side of the profile to be connected, this unit is screwed into the groove of the other profile and can be adjusted
VBG JU 40-160 Straight Support Joint Connector
for connecting profiles
no drilling or tapping required
VBL X 50-75 L-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
VBL JU 80-120 L-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
VBW JU 45 45° Support Joint Connector
for connecting profiles in 45°
no drilling or tapping required
no miter cut required
Scope of Delivery:
2 channel nuts included
VBW JU 120 120° Support Joint Connector
for connecting profiles adjustable in 120°
no drilling or tapping required
no miter cut required
Scope of Delivery:
2 channel nuts included
EPL / End Plate for Profiles
for connecting profiles
two frontally aligned profiles can terminate with the EPL in a stable connection
two threads have to be cut for each profile
EPL JU 3-40-40 End Plate
for connecting profiles
two frontally aligned profiles can terminate with the EPL in a stable connection
two threads have to be cut for each profile
EPL JU 3-80-40 End Plate
for connecting profiles
two frontally aligned profiles can terminate with the EPL in a stable connection
two threads have to be cut for each profile
ADK JU 40-40 Profile End Cap
for closing profile ends
holes for receiving the profile caps should be deburred
cover caps are simply opened with a rubber hammerpictures may differ
ADK JU 80-40 Profile End Cap
for closing profile ends
holes for receiving the profile caps should be deburred
cover caps are simply opened with a rubber hammerpictures may differ
STB M6 Stepped Drill
to screw components directly to profiles
for use with e.g.:
Universal Connector UVV
Universal Joint Connector UVF
Cross Connector KV
Butt Connector SV
GB-M14x1,5 Tapp Drill
to screw components directly to profiles
hand tap with cut
cutter M14x1,5 (fine thread)
WSS JU 1/4-1/8 Angle Connector
to mount vacuum cups directly to the profilevacuum can be connected on the left or rightconnector is form locking to profiles
WLS JU 1/4-1/8-60 Long angle connector
to mount vacuum cups directly to the profile
vacuum can be connected on the left or right
flexible mounting options
AP-P PGR 64 Adapter for PGR-P and PGR for mounting to profiles
Direct adaptation of the PGR-P or PGR to a profile PGR-P and PGR can be mounted lengthwise and crosswise to the profile, always symmetrically to the profile the adapter plate enables a direct connection to the respective profilecan be used with or without bushings suitable for PGR-P and PGR-plus
ASN HP 20 Mounting Bracket for ASN SE
use with VLR extension tube
see application example
Accessories:
Extension Tube VLR
ASN HP 30 Mounting Bracket for ASN SE
use with VLR extension tube
see application example
Accessories:
Extension Tube VLR
HUE 20-50-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-30-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-75-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE 20-100-20 Slide Unit
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partsliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinder end positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-30-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-50-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-75-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-100-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE G 20-125-20 Slide Unit with Sliding Guide
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partnew sliding guidelightweight alternative to HUEfree from floating due to springloaded sliding elementswear is compensated by springend positions of cylinders can be monitoredmounting material fits for profile systemscan absorb lateral forces and momentsdouble-acting cylinder maximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-30-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-50-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-75-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-100-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUE X 25-125-20 Slide Unit with connection to X-Profile
e.g. for compacting plastic parts or for pushing active elements (such as nippers, gripper fingers, grippers etc.) against the plastic partform fitting connection to X 25 profilesliding unit easy to mount on profilemounting material fits for profile systemsprecise and resilient linear ball guidecan absorb lateral forces and momentsdouble-acting cylinderend positions of cylinders can be monitoredAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HEU 25-80 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-100 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-160 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-200 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
KKB-X-JU Twist on cable/hose saddle
allows easy attachment of hoses and cables to the Aluminium profile
no tools needed
easy to swivel into profiles
quick installation without screw
subsequent insertion into the profiles possible
cables can be mountedin longitudinal and transverse direction
MFS T2 3,7 Magnetic Field Sensor, 2 Acting Points, teachable
2 teach points / acquisition of 2 end positions
depending on magnetic field, stroke up to 50 mm ascertainable
compact configuration
easy clamping with stud screw
for roundslot-cylinders, gripper fingers and other actuators
Accessories e.g.:
Connector KG 8-4
Sensor Bracket GRF SH
Adapter ASY
GPM-2-SWH-G150 Base Plate for SWH
special EOAT base plate for SWH Quick Change SystemSWH can be mounted directly on this base plate.for all profile systems: L, X, JUpossibility to be mounted directly on SWMScope of delivery:includes mounting material
KPL JU40-EU80 Cross Connector JU to Europrofile
Clamp for combining X profile with Euro profile for small, light parts i.e. sensors
no drilling required
easy to use
form locking for X- and Europrofiles
enhances the capabilities of both profiles
bushing for Europrofil has to be added by customer
KPL V EU80-JU40 Cross Connector JU to Europrofile, reinforced
Clamp for combining X profile with Euro profile for small, light parts i.e. sensors
no drilling required
easy to use
form locking for X- and Europrofiles
enhances the capabilities of both profiles
bushing for Europrofil has to be added by customer
GPM 2 JU Gripper (EOAT) Base Plate
Version 1: with channel nuts respectively sunk screw and bore holes, without channel nuts
Version 2: without channel nuts, base plates are marked (except GPM 01)
Version 3: with end-to-end channel nut and bore holes
customized hole pattern for individual robot systems on request
GPM 3 JU Gripper (EOAT) Base Plate
Version 1: with channel nuts respectively sunk screw and bore holes, without channel nuts
Version 2: without channel nuts, base plates are marked (except GPM 01)
Version 3: with end-to-end channel nut and bore holes
customized hole pattern for individual robot systems on request
GPM 3 JU DN Gripper (EOAT) Base Plate
Version 1: with channel nuts respectively sunk screw and bore holes, without channel nuts
Version 2: without channel nuts, base plates are marked (except GPM 01)
Version 3: with end-to-end channel nut and bore holes
customized hole pattern for individual robot systems on request
GPG 3-30 JU Gripper (EOAT) Base Plate, spring-loaded
robot hand base plate with bore holes and cnanel nuts respectively sunk screws
moving plate can be rotated 90°
spring tension can be reduced by removing springs
GWP EX 3 U Channel Nut, "Swivel-In", with one Thread M3
for adding components belated to the EOAT
easy to handle
high flexibility
no demounting of the EOAT necessary, other components stay in their original position
compatible to X-system components
locks against rotation, form closure
GWP EX 4 U Channel Nut, "Swivel-In", with one Thread M4
for adding components belated to the EOAT
easy to handle
high flexibility
no demounting of the EOAT necessary, other components stay in their original position
compatible to X-system components
locks against rotation, form closure
GWP EX 5 U Channel Nut, "Swivel-In", with one Thread M5
for adding components belated to the EOAT
easy to handle
high flexibility
no demounting of the EOAT necessary, other components stay in their original position
compatible to X-system components
locks against rotation, form closure
GWP 3 U Channel Nut with one Thread M3
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 4 U Channel Nut with one Thread M4
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 4-8 U Channel Nut with two Threads M4
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 4-17 U Channel Nut with two Threads M4
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 4-25 U Channel Nut with two Threads M4
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 4-31 U Channel Nut with two Threads M4
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5 U Channel Nut with one Thread M5
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 5-100 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-10 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-15 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-16 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-18 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-22 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-25 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-28 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-30 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-35 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-38 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-40 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-42 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-45 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-50 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-58 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-60 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-63 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-65 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-70 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-80 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-90 U Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 5-100-100 U Channel Nut with three Threads M5
channel nut with 3 threads
compatible to GPM 3
GWP 6 U Channel Nut with one Thread M6
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 6-100 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-10 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-15 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-20 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-25 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-30 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-35 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-40 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-45 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-50 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-51 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-60 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-70 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-80 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-90 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-91 U Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-100-100 U Channel Nut with three Threads M6
channel nut with 3 threads
compatible to GPM 3
PL-U Channel Nut Profile 2000 mm
for making customized channel nuts
channel nut without bore holes