| Description | Part No. | Option | ||
|---|---|---|---|---|
|
PGR-plus 20 Parallel Gripper | 1-430-03-00-1 | Stroke: 4 mm, Opening Force: 30 N, Closing Force: 34 N, Size: 20 | |
|
|
PGR-plus 25 Parallel Gripper | 1-430-06-00-1 | Stroke: 6 mm, Opening Force: 32 N, Closing Force: 38 N, Size: 25 | |
|
PGR-plus 32 Parallel Gripper | 1-430-09-00-1 | Stroke: 8 mm, Opening Force: 70 N, Closing Force: 80 N, Size: 32 | |
|
PGR-plus 40 Parallel Gripper | 1-430-12-00-1 | Stroke: 12 mm, Opening Force: 110 N, Closing Force: 135 N, Size: 40 | |
|
PGR-plus 50 Parallel Gripper | 1-430-15-00-1 | Stroke: 16 mm, Opening Force: 195 N, Closing Force: 215 N, Size: 50 | |
|
PGR-plus 64 Parallel Gripper | 1-430-18-00-1 | Stroke: 20 mm, Opening Force: 280 N, Closing Force: 300 N, Size: 64 |
- for precise gripping or inserting applications
- PGR-plus: monitoring of two end-positions with MFS T2, not for PGR-plus 20
- Sensor IRK 4
- Blank Jaws AP-PGR
- PU Pad + Glue KUG
- Adaper AP PGR
- Sensor IRK 4 for PGR-plus 32/40/50/64
- Sensor IRK 4.4 for PGR-plus 20/25
| Active principle: | double-acting |
|---|---|
| Hose connection: | 3/0,5 mm |
| Hose connection thread: | M3 |
| Jaw material: | Steel |
| Material: | Steel |
| Monitoring: | optional |
| Stroke per Jaw: | 3 mm |
| Weight: | 61.42 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GB PGR 25 Universal Jaws for PGR
blank jaws for tcustomizing PGR-P jaws
fits for PGR-P and PGR-plus
made of Aluminium, smooth surface
Accessories e.g.:
PU Pad + Glue KUG
AP PGR 25 Adapter for PGR
adapts Parallel Gripper on VLR extension tubes
can be used with or without bushings
suitable for PGR-P and PGR-plus
AP-P PGR 25 Adapter for PGR-P and PGR for mounting to profiles
Direct adaptation of the PGR-P or PGR to a profile PGR-P and PGR can be mounted lengthwise and crosswise to the profile, always symmetrically to the profile the adapter plate enables a direct connection to the respective profilecan be used with or without bushings suitable for PGR-P and PGR-plus
IRK 4.4 Proximity Switch
inductive proximity switch with a 0.8mm range
it senses the open/close positions of gripper jaws
IRK 4 suitable for: PGR-P/PGR 32, 40, 50, 64
IRK 4.4 suitable for: PGR 20, 25
PGR-P 25 Parallel Gripper, pneumatic
e.g. for precise gripping or inserting applicationsload-bearing and low-play T-slot guide for safe and precise handling with high load ratings
drive concept for maximum gripping force
housing made of high-strength aluminum alloy for minimum weight and high stiffness
double acting: can be used as as external or internal gripper
small construction volume for minimal contours
centering possibilities on the gripping jaws
versatile adaptations for flexible assembling
power supply on two gripper sides possible; also hoseless direct connection possible
integrated permanent magnet for sensing end position (see accessories)
precise sensing of jaw position by adapting induction field sensors (see accessories)
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
GB-PGR - Unmachined Jaws (blanks) for Parallel GripperKUG - Glue and Polyurethane Pad: PU on the gripping surface increases the friction AP PGR - adaptation of the parallel gripper to the respective extension tube
MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each(Part No. 1-808-36-00)
IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors