| Part No.: | 1-435-21-00 |
Part No.:
1-435-21-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
Adapter for PGR-P and PGR for mounting to profiles | 1-435-20-00 | Compatible to: PGR-plus 20 | |
|
|
AP-P PGR 25 Adapter for PGR-P and PGR for mounting to profiles | 1-435-21-00 | Compatible to: PGR-P 25; PGR-plus 25 | |
|
AP-P PGR 32 Adapter for PGR-P and PGR for mounting to profiles | 1-435-22-00 | Compatible to: PGR-P 32; PGR-plus 32 | |
|
AP-P PGR 40 Adapter for PGR-P and PGR for mounting to profiles | 1-435-23-00 | Compatible to: PGR-P 40; PGR-plus 40 | |
|
AP-P PGR 50 Adapter for PGR-P and PGR for mounting to profiles | 1-435-24-00 | Compatible to: PGR-P 50; PGR-plus 50 | |
|
AP-P PGR 64 Adapter for PGR-P and PGR for mounting to profiles | 1-435-25-00 | Compatible to: PGR-P 64; PGR-plus 64 |
Direct adaptation of the PGR-P or PGR to a profile
- PGR-P and PGR can be mounted lengthwise and crosswise to the profile, always symmetrically to the profile
- the adapter plate enables a direct connection to the respective profile
- can be used with or without bushings
- suitable for PGR-P and PGR-plus
| Active principle: | - |
|---|---|
| Clamping Ø: | - |
| Hose connection thread: | - |
| Material: | Aluminium |
| Monitoring: | - |
| Size: | 25 |
| Stroke: | - |
| Weight: | 53 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
X 25-25-1000 Aluminiumprofile 1000 mm
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 25-25-2000 Aluminiumprofile 2000 mm
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 25-25-0001 Aluminiumprofile Length: Individual Cut
for parts up to 10 kgcustom length on request special profile length larger than 2000 mm on request
X 25-10-2000 Aluminiumprofile 2000 mm
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-10-0001 Aluminiumprofile Length: Individual Cut
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-18-2000 Aluminiumprofile 2000 mm
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
X 25-18-0001 Aluminiumprofile Length: Individual Cut
best suited for part weight of up to 2 kgcustom length upon request profile length min. 50 mm channel nuts are compatible to X and JU profilesspecial profile length larger than 2000 mm on request
PGR-plus 25 Parallel Gripper
for precise gripping or inserting applications
PGR-plus: monitoring of two end-positions with MFS T2, not for PGR-plus 20
Sensor IRK 4
Accessories e.g.:
Blank Jaws AP-PGR
PU Pad + Glue KUG
Adaper AP PGR
Sensor IRK 4 for PGR-plus 32/40/50/64
Sensor IRK 4.4 for PGR-plus 20/25
PGR-P 25 Parallel Gripper, pneumatic
e.g. for precise gripping or inserting applicationsload-bearing and low-play T-slot guide for safe and precise handling with high load ratings
drive concept for maximum gripping force
housing made of high-strength aluminum alloy for minimum weight and high stiffness
double acting: can be used as as external or internal gripper
small construction volume for minimal contours
centering possibilities on the gripping jaws
versatile adaptations for flexible assembling
power supply on two gripper sides possible; also hoseless direct connection possible
integrated permanent magnet for sensing end position (see accessories)
precise sensing of jaw position by adapting induction field sensors (see accessories)
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
GB-PGR - Unmachined Jaws (blanks) for Parallel GripperKUG - Glue and Polyurethane Pad: PU on the gripping surface increases the friction AP PGR - adaptation of the parallel gripper to the respective extension tube
MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each(Part No. 1-808-36-00)
IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors