| Part No.: | 1-431-06-00 |
Part No.:
1-431-06-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
PGR-P 25 Parallel Gripper, pneumatic | 1-431-06-00 | Stroke: 6 mm, Opening Force: 40 N, Closing Force: 35 N, Size: 25 | |
|
PGR-P 32 Parallel Gripper, pneumatic | 1-431-09-00 | Stroke: 8 mm, Opening Force: 80 N, Closing Force: 70 N, Size: 32 | |
|
PGR-P 40 Parallel Gripper, pneumatic | 1-431-12-00 | Stroke: 12 mm, Opening Force: 155 N, Closing Force: 140 N, Size: 40 | |
|
PGR-P 50 Parallel Gripper, pneumatic | 1-431-15-00 | Stroke: 16 mm, Opening Force: 210 N, Closing Force: 180 N, Size: 50 | |
|
PGR-P 64 Parallel Gripper, pneumatic | 1-431-18-00 | Stroke: 20 mm, Opening Force: 340 N, Closing Force: 310 N, Size: 64 |
- e.g. for precise gripping or inserting applications
- load-bearing and low-play T-slot guide for safe and precise handling with high load ratings
- drive concept for maximum gripping force
- housing made of high-strength aluminum alloy for minimum weight and high stiffness
- double acting: can be used as as external or internal gripper
- small construction volume for minimal contours
- centering possibilities on the gripping jaws
- versatile adaptations for flexible assembling
- power supply on two gripper sides possible; also hoseless direct connection possible
- integrated permanent magnet for sensing end position (see accessories)
- precise sensing of jaw position by adapting induction field sensors (see accessories)
- maximum air pressure is 6 bar, use dry and filtered air only
- GB-PGR - Unmachined Jaws (blanks) for Parallel Gripper
- KUG - Glue and Polyurethane Pad: PU on the gripping surface increases the friction
- AP PGR - adaptation of the parallel gripper to the respective extension tube
- MFS T2 - magnetic field sensor with 2 switching points „teachable“ for the end position sensing of the piston rod, easy to mount via the integrated C-slots (Part No. 1-808-30-00)
- ICS 8 - 3-pole magnetic field sensor for end position sensing of the piston rod, easy to install via the integrated C-slots, basic and working position requires one sensor each
(Part No. 1-808-36-00) - IRK 4 - induction field sensors for the end position detection of the gripper jaws, basic and working position requires one sensor each, sensor bracket in the scope of delivery (Part No. 1-808-02-00)
- AS-P PGR-P - Sensor Bracket Precise mounting kit: complete set for querying the exact jaw position using induction field sensors
| Active principle: | double-acting |
|---|---|
| Hose connection: | 3/0,5 mm |
| Hose connection thread: | M3 |
| Jaw material: | stainless Steel |
| Material: | Aluminium |
| Monitoring: | optional |
| Stroke per Jaw: | 3 mm |
| Weight: | 60 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GB PGR 25 Universal Jaws for PGR
blank jaws for tcustomizing PGR-P jaws
fits for PGR-P and PGR-plus
made of Aluminium, smooth surface
Accessories e.g.:
PU Pad + Glue KUG
AP PGR 25 Adapter for PGR
adapts Parallel Gripper on VLR extension tubes
can be used with or without bushings
suitable for PGR-P and PGR-plus
AP-P PGR 25 Adapter for PGR-P and PGR for mounting to profiles
Direct adaptation of the PGR-P or PGR to a profile PGR-P and PGR can be mounted lengthwise and crosswise to the profile, always symmetrically to the profile the adapter plate enables a direct connection to the respective profilecan be used with or without bushings suitable for PGR-P and PGR-plus
IRK 4.4 Proximity Switch
inductive proximity switch with a 0.8mm range
it senses the open/close positions of gripper jaws
IRK 4 suitable for: PGR-P/PGR 32, 40, 50, 64
IRK 4.4 suitable for: PGR 20, 25