| Part No.: | 1-408-01-00 |
Part No.:
1-408-01-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
GRZ 06-08 CM Micro Gripper with Jaw Type: Chequered / Chequered | 1-408-01-00 | Piston Ø: 8 mm, : 6 mm, Opening width: 10 mm, Jaw type: chequered / chequered, Closing Force: 19 N, Connection: -, Signal output: - | |
|
Gripper, Jaw Type: both sides Steel, Cheq., harde. | 1-408-05-00 | Piston Ø: 8 mm, : 6 mm, Opening width: 10 mm, Jaw type: chequered, hardened / chequered, hardened, Closing Force: 19 N, Connection: -, Signal output: - |
- gripper GRZ in miniature design suitable for the Micro System, known from the series GRZ 10-08
- ideal when a higher closing force is required for small robot hands (EOAT)
- lightweight
- small and compact design
- single-acting gripper
- gripper jaws chequered
- two pistons, Ø 8mm
- optionally equipped sensor mounting bracket and initiator
- closing force measured at point of jaws at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
- Sensor Bracket SH GRZ 10-08
- adapter for board mounting AGP GRZ
| Active principle: | single-acting |
|---|---|
| Cable length: | - |
| Contact: | - |
| Hose connection thread: | M4 |
| Jaw material: | anodized Aluminium |
| Material: | Aluminium |
| Monitoring: | optional |
| Poles: | - |
| Sensor type: | - |
| Weight: | 15 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
PKS 6-6-10 Parallel Connector
connects two components with the same clamp diameter parallel
both clamps can be set independently
WST ML 6 Angle Clamp microLIGHT, ML-Profile to Ø 6mm
microLIGHT
- The ultralight micro system The
microLIGHT system is a consistent extension of our robotic hand construction
kit. The microLIGHT system stands for an ultra-light design, high ease of
assembly with the easy possibility of connecting components from the robot hand
construction kit with clamping diameters of 6 and 10
millimeters.Application
e.g.: microLight grippers can be easily connected to all common
robots, e.g. linear systems, articulated arm robots or
cobotsThe microLIGHT clamping pieces
have a contact surface with an EP-coating for optimal grip of other EOAT
componentsAccessories
e.g.: ML profile /
microLIGHT ProfileGripper
arms, gripper GRZ and other EOAT elements with clamping-Ø 6mm or
10mm Other microLIGHT
components are: GPM ML /
EOAT Base Plate microLIGHT ML profile /
microLIGHT Profile KBV ML / Cross Connector
microLIGHT WSL ML U / Long Angle Clamp microLIGHT
WSL ML 6 U Long Angle Clamp microLIGHT, ML-Profile to Ø 6mm
microLIGHT - The ultralight
micro system The microLIGHT system is
a consistent extension of our robotic hand construction kit. The microLIGHT
system stands for an ultra-light design, high ease of assembly with the easy
possibility of connecting components from the robot hand construction kit with
clamping diameters of 6 and 10
millimeters.Application
e.g.: microLight grippers can be easily connected to all common
robots, e.g. linear systems, articulated arm robots or
cobotsThe microLIGHT clamping pieces have a contact surface with an EP-coating for optimal grip of other EOAT componentsThe Link Angle Clamps WSL ML are adjustable in 2mm stepsAccessories e.g.: ML profile /
microLIGHT Profile Gripper
arms, gripper GRZ and other EOAT elements with clamping-Ø 6mm or
10mm
Other
microLIGHT components
are: GPM ML / EOAT Base
Plate microLIGHT ML profile / microLIGHT
Profile KBV ML / Cross Connector
microLIGHT WSL ML U / Long Angle Clamp microLIGHT
WSL L 6-25 U Angle Clamp universal, Micro Series
universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
KVB L 6 Cross Connector, Micro Series
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KKS 6-6-10 Cross Connector, Micro Series
connects two components with the same clamp diameter at a 90° angle
both clamps can be set independently
Type KKS M
mirrored design of KKS
allows better setting options in a robot hand
RMB 0610-10 Reduction with collar, Micro Series
connects two components with clamping diameter 6mm at a 90° angle
both clamps can be set independently
ROB 0610-10 Reduction without collar, Micro Series
connects two components with clamping diameter 6mm at a 90° angle
both clamps can be set independently
WKA 6-6-20 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing
WKA 6-6-40 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing
WKA 6-6-60 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing