| Part No.: | 7-105-03-00 |
Part No.:
7-105-03-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
WSL ML 6 U Long Angle Clamp microLIGHT, ML-Profile to Ø 6mm | 7-105-03-00 | : 30-52 mm, Compatible to: ML-Profile 10x10, Clamping Ø: 6 mm | |
|
WSL ML 10 U Long Angle Clamp microLIGHT, ML-Profile to Ø 10mm | 7-105-06-00 | : 30-52 mm, Compatible to: ML-Profile 10x10, Clamping Ø: 10 mm |
microLIGHT - The ultralight
micro system
The microLIGHT system is
a consistent extension of our robotic hand construction kit. The microLIGHT
system stands for an ultra-light design, high ease of assembly with the easy
possibility of connecting components from the robot hand construction kit with
clamping diameters of 6 and 10
millimeters.
Application
e.g.: microLight grippers can be easily connected to all common
robots, e.g. linear systems, articulated arm robots or
cobots
- The microLIGHT clamping pieces have a contact surface with an EP-coating for optimal grip of other EOAT components
- The Link Angle Clamps WSL ML are adjustable in 2mm steps
Accessories e.g.:
- ML profile /
microLIGHT Profile
- Gripper arms, gripper GRZ and other EOAT elements with clamping-Ø 6mm or 10mm
Other
microLIGHT components
are:
- GPM ML / EOAT Base Plate microLIGHT
- ML profile / microLIGHT Profile
- KBV ML / Cross Connector microLIGHT
- WSL ML U / Long Angle Clamp microLIGHT
| Ball joint: | no |
|---|---|
| Swivel head: | no |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GSE U 6-M3-M3-20 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U 6-M3-M3-40 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U 6-M3-M3-60 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U M6x1-M3-M3-20 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U M6x1-M3-M3-40 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U M6x1-M3-M3-60 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GGE 6-M3-M3-20 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
GGE 6-M3-M3-40 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
GGE 6-M3-M3-60 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
GAF U 6-M3-M3-10 Spring Loaded Gripper Arm, Micro Series
for mounting vacuum cups in the robot hand
vacuum connection can be mounted sidewise or at the end of the gripper arm
for rotationally symmetrical vacuum cups
vacuum cup can rotate relative to the clamping piece
for best positioning of vacuum cups to the part to be removed
spring travel to compensate for the ejector stroke
gripper arm is guided with rotation enabled
high quality stainless steel sprin
GAF U M6-M3-M3-10 Spring Loaded Gripper Arm, Micro Series
for mounting vacuum cups in the robot hand
vacuum connection can be mounted sidewise or at the end of the gripper arm
for rotationally symmetrical vacuum cups
vacuum cup can rotate relative to the clamping piece
for best positioning of vacuum cups to the part to be removed
spring travel to compensate for the ejector stroke
gripper arm is guided with rotation enabled
high quality stainless steel sprin
GRZ 06-06 Micro Gripper with Jaw Type: Chequered / Chequered
micro sized gripper GRZ
very lightweight
very small and compact design
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 06-06 EP Micro Gripper, Jaw Type: both sides EP Shore 60
micro sized gripper GRZ
very lightweight
very small and compact design
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 06-08 CM Micro Gripper with Jaw Type: Chequered / Chequered
gripper GRZ in miniature design suitable for the Micro System, known from the series GRZ 10-08
ideal when a higher closing force is required for small robot hands (EOAT)
lightweight
small and compact design
single-acting gripper
gripper jaws chequered
two pistons, Ø 8mm
optionally equipped sensor mounting bracket and initiator
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor Bracket SH GRZ 10-08
adapter for board mounting AGP GRZ
ML-10-10-1000 Profile microLIGHT, 10x10, 1000mm
microLIGHT - The ultralight
micro system The microLIGHT system is
a consistent extension of our robotic hand construction kit. The microLIGHT
system stands for an ultra-light design, high ease of assembly with the easy
possibility of connecting components from the robot hand construction kit with
clamping diameters of 6 and 10
millimeters.Application
e.g.: microLight grippers can be easily connected to all common
robots, e.g. linear systems, articulated arm robots or
cobotsAccessories e.g.: GPM ML /
EOAT Base Plate microLIGHT KBV ML / Cross Connector
microLIGHT WST ML / Angle Clamp
microLIGHT WSL ML U / Long Angle Clamp microLIGHT
Other microLIGHT
components are: GPM ML /
EOAT Base Plate microLIGHT KBV ML / Cross Connector
microLIGHT WST ML / Angle Clamp
microLIGHT WSL ML U / Long Angle Clamp microLIGHT
ML-10-10-0001 Profile microLIGHT, 10x10, custom cut
microLIGHT - The ultralight
micro system The microLIGHT system is
a consistent extension of our robotic hand construction kit. The microLIGHT
system stands for an ultra-light design, high ease of assembly with the easy
possibility of connecting components from the robot hand construction kit with
clamping diameters of 6 and 10
millimeters.Application
e.g.: microLight grippers can be easily connected to all common
robots, e.g. linear systems, articulated arm robots or
cobotsAccessories e.g.: GPM ML /
EOAT Base Plate microLIGHT KBV ML / Cross Connector
microLIGHT WST ML / Angle Clamp
microLIGHT WSL ML U / Long Angle Clamp microLIGHT
Other microLIGHT
components are: GPM ML /
EOAT Base Plate microLIGHT KBV ML / Cross Connector
microLIGHT WST ML / Angle Clamp
microLIGHT WSL ML U / Long Angle Clamp microLIGHT