| Part No.: | 1-115-39-00 |
Part No.:
1-115-39-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
KKS 6-6-10 Cross Connector, Micro Series | 1-115-39-00 | Clamping Ø: 6 mm, Mirrored: no | |
|
KKS 10-10-16 Cross Connector | 1-115-40-00 | Clamping Ø: 10 mm, Mirrored: no | |
|
KKS 14-14-18 Cross Connector | 1-115-45-00 | Clamping Ø: 14 mm, Mirrored: no | |
|
KKS 20-20-26 Cross Connector | 1-115-50-00 | Clamping Ø: 20 mm, Mirrored: no | |
|
KKS-M 20-20-26 Cross Connector, mirrored | 1-115-51-00 | Clamping Ø: 20 mm, Mirrored: yes |
- connects two components with the same clamp diameter at a 90° angle
- both clamps can be set independently
Type KKS M
- mirrored design of KKS
- allows better setting options in a robot hand
| Ball joint: | no |
|---|---|
| Compatible to: | Ø6 mm |
| Material: | Aluminium |
| Weight: | 15.29 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
PKS 6-6-10 Parallel Connector
connects two components with the same clamp diameter parallel
both clamps can be set independently
GSE U 6-M3-M3-20 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U 6-M3-M3-40 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GSE U 6-M3-M3-60 Gripper Arm for Vacuum Cups with Air Duct, Micro
for mounting vacuum cups to the robot hand
vacuum connection sidewise or air duct
also available with external thread on request
GGE 6-M3-M3-20 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
GGE 6-M3-M3-40 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
GGE 6-M3-M3-60 Elbow Gripper Arm for Vacuum Cups, Micro Series
for mounting vacuum cups at an angle
swivel head can be clamped separately by cylinder screw
WKA 6-6-20 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing
WKA 6-6-40 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing
WKA 6-6-60 Angle Arm, Micro Series
e.g. for easy mounting of cylindrical components
easy to handle
various mounting options
secure connection by cylinder screw
WKA 20-14-100 including integrated set screw with tip for additional fixing
GAF U 6-M3-M3-10 Spring Loaded Gripper Arm, Micro Series
for mounting vacuum cups in the robot hand
vacuum connection can be mounted sidewise or at the end of the gripper arm
for rotationally symmetrical vacuum cups
vacuum cup can rotate relative to the clamping piece
for best positioning of vacuum cups to the part to be removed
spring travel to compensate for the ejector stroke
gripper arm is guided with rotation enabled
high quality stainless steel sprin
GRZ 06-06 Micro Gripper with Jaw Type: Chequered / Chequered
micro sized gripper GRZ
very lightweight
very small and compact design
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 06-06 EP Micro Gripper, Jaw Type: both sides EP Shore 60
micro sized gripper GRZ
very lightweight
very small and compact design
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 06-08 CM Micro Gripper with Jaw Type: Chequered / Chequered
gripper GRZ in miniature design suitable for the Micro System, known from the series GRZ 10-08
ideal when a higher closing force is required for small robot hands (EOAT)
lightweight
small and compact design
single-acting gripper
gripper jaws chequered
two pistons, Ø 8mm
optionally equipped sensor mounting bracket and initiator
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor Bracket SH GRZ 10-08
adapter for board mounting AGP GRZ
Gripper, Jaw Type: both sides Steel, Cheq., harde.
gripper GRZ in miniature design suitable for the Micro System, known from the series GRZ 10-08
ideal when a higher closing force is required for small robot hands (EOAT)
lightweight
small and compact design
single-acting gripper
gripper jaws chequered
two pistons, Ø 8mm
optionally equipped sensor mounting bracket and initiator
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor Bracket SH GRZ 10-08
adapter for board mounting AGP GRZ
