- inductive proximity switch
- sensor is used e.g. for standard monitoring on ASS grippers (GRZ 20-16, GRZ 32, GRZ 10-12) and stroke units (HEU / HEU-L)
- PNP and NPN switching available
- Initiator can be fixed with an M3 screw
- connection M8 3-pin
- M3 hexagon socket screw not included
Ambient temperature: | 1,4 mm |
---|---|
Cable length: | 3 m |
Connection: | open cable head |
Connection thread: | - |
Contact: | closing contact |
Material: | Plastic material |
Range: | - |
Schaftdurchmesser: | - |
Weight: | 32 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
SWM 2 KH OSK Quick Change System with Lever Locking Device
Quick Change System with integrated safety lock against unwanted opening of the lever locking device
easy exchange of the EOAT (Robot Hand)extremely short EOAT (Robot Hand) change over times minimizes down timeno need for demounting the robot handto preserve position of robot handintegrated pneumaticquick release couplings
indictive monitoring possible (sensor on demand)
Additional accessories e.g.:
Sensor IEK 8 or IES 8
Pneumatic Connection SWM LL
Base Plate GPM
GRZ 10-12 Gripper with Jaw Type: Chequered / Chequered
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 BG Gripper with Jaw Type: Chequered / Chequered
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 A Gripper with Jaw Type: Adapter / Adapter
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 A1 Gripper with Jaw Type: Adapter / Adapter
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 PK Gripper with Jaw Type: Prism / V-Groove
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 KK Gripper with Jaw Type: V-Groove / V-Groove
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CF Gripper with Jaw Type: Chequered / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CF NPN Gripper with Jaw Type: Chequered / Sensor NPN
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS Gripper with Jaw Type: Chequered / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS EP Gripper with Jaw Type: EP Coating, blue / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS NPN Gripper with Jaw Type: Chequered / Sensor NPN
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS WK Gripper with Jaw Type: for Soft Material / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS WK NPN Gripper, Jaw Type: for Soft Material / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 CFS EP NPN Gripper, Jaw Type: EP Coating, blue / Sensor NPN
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 DB Gripper with Jaw Type: Swiveling / Swiveling
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 AH Gripper, Jaw Type: both sides Chequered extra wide
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 S Gripper with Jaw Type: Saw Tooth / Saw Tooth
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 AH EP Gripper, Jaw Type: both sides EP Coat., extra wide
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 SCFS Gripper with Jaw Type: Saw Tooth / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 RB CS Gripper, Jaw Type: Chequered extra wide / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 RB CS NPN Gripper, Jaw Type: Chequered extra wide / Sensor
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 SCFS NPN Gripper with Jaw Type: Saw Tooth / Sensor NPN
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 Z Gripper with Jaw Type: both sides toothed, chamfer
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 G Gripper with Jaw Type: Smooth / Smooth
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 G PTFE Gripper, Jaw Type: both sides Smooth, PTFE Coating
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 EP Gripper, Jaw Type: both sides EP Coating, blue
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 10-12 R HT Gripper with Jaw Type: Chequered / Chequered
single-acting, compact gripper
parts can not get stuck behind jaws (except AH, AH EP, DB, A, A1)
two pistons Ø 12mm
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 14 R Gripper with Jaw Type: Chequered / Chequered
smaller size with sensor and greater closing force
jaws made of hardcoated Aluminium
air connection M5 optional in adapter or laterally
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 14 R,CS,I Gripper with Jaw Type: Chequered / Sensor
smaller size with sensor and greater closing force
jaws made of hardcoated Aluminium
air connection M5 optional in adapter or laterally
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 14 D A Gripper with Jaw Type: Adapter Jaw / Adapter Jaw
smaller size with sensor and greater closing force
jaws made of hardcoated Aluminium
air connection M5 optional in adapter or laterally
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
GRZ 14 Body Gripper Body
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
GRZ 14 Gripper Jaws R Jaw Type: Chequered / Chequered
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws R,CS,I Jaw Type: Chequered / Sensor
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws R,CS,I NPN Jaw Type: Chequered / Sensor NPN
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws A Jaw Type: Adapter Jaw / Adapter Jaw
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws S Jaw Type: Saw Tooth / Saw Tooth
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws PU Jaw Type: PU Insert / PU Insert
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws EP Jaw Type: EP Coating, blue / EP Coating, blue
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws S,CS,I Jaw Type: EP Coating, blue / Sensor
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws S,CS,I,NPN Jaw Type: Saw Tooth / Sensor NPN
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws S,CS,I Jaw Type: Saw Tooth / Sensor
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws PS,CS,I Jaw Type: Parrot Contour / Sensor
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws PS,CS,I NPN Jaw Type: Parrot Contour / Sensor NPN
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws EP,CS,I,NPN Jaw Type: EP Coating, blue / Sensor NPN
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 14 Gripper Jaws EP,CS,I,EP Jaw Type: EP 90, blue / EP 90, blue + Sensor
gripper jaws for creating individual GRZ 14
Jaw pairs without integrated query can be optionally equipped with a sensor bracket and initiator
gripper jaws made of hardcoated Aluminium
GRZ 20-16 Gripper with Jaw Type: with holes / with holes
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 R Gripper with Jaw Type: Chequered / Chequered
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 RC Gripper with Jaw Type: Chequered / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 RCS Gripper with Jaw Type: Chequered / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 A Gripper with Jaw Type: Adapter Jaw / Adapter Jaw
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 PK Gripper with Jaw Type: Prism / V-Groove
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 C Gripper with Jaw Type: with holes / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 C NPN Gripper with Jaw Type: with holes / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 CS Gripper with Jaw Type: with holes / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 RC NPN Gripper with Jaw Type: Chequered / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 CS NPN Gripper with Jaw Type: with holes / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 RCS NPN Gripper with Jaw Type: Chequered / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 PU Gripper with Jaw Type: PU Insert / PU Insert
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 S Gripper with Jaw Type: Saw Tooth / Saw Tooth
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 SC Gripper with Jaw Type: Saw Tooth / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 SCS Gripper with Jaw Type: Saw Tooth / Sensor
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 SC NPN Gripper with Jaw Type: Saw Tooth / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 SCS NPN Gripper with Jaw Type: Saw Tooth / Sensor NPN
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 DB Gripper with Jaw Type: Swiveling / Swiveling
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 G Gripper with Jaw Type: Smooth / Smooth
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 EP Gripper, Jaw Type: both sides EP Coating, blue
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ 20-16 K Gripper with Jaw Type: Chequered / Contour
single-acting gripper, see table for properties of the jaw geometries
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Adapter AD 20-16
GRZ K 20-16 R Gripper with Booster, serrated jaws
Single-acting gripper
with enforced piston for even
more holding force. holding force: 117 Npiston diameter 16 mmenforced holding force, +80%
compared to GRZ 20-16design similar GRZ 20-16closing force measured at point of
jaws at 6 barmaximum air pressure is 6 bar, use
dry and filtered air only
GRZ 20 Gripper Jaws EP,CS,I,EP Jaw Type: EP 90, blue / EP 90, blue + Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws EP,CS,I NPN Jaw Type: EP Coating, blue / Sensor NPN
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws EP,CS,I Jaw Type: EP Coating, blue / Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Body Gripper Body
for customizing gripper GRZ 20
2 pistons with diameter 20mm
all components easy to assemble
single-acting body
Accessories e.g.:
Adapter GRZ AD 14
Adapter GRZ AD 20
Sensor Bracket SH GRZ 20
all Gripper Jaws Size 20
GRZ 20 Gripper Jaws R Jaw Type: Chequered / Chequered
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws A Jaw Type: Adapter Jaw / Adapter Jaw
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws Z Jaw Type: toothed, chamfered / toothed, chamfered
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws S Jaw Type: Saw Tooth / Saw Tooth
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws SL Jaw Type: Saw Tooth long / Saw Tooth long
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws PU Jaw Type: PU Einsatz / PU Einsatz
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws R,CS,I Jaw Type: Chequered / Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20Gripper Jaws PS,CS,I Jaw Type: Parrot Contour / Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws Z,CS,I Jaw Type: toothed, chamfered / Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws S,CS,I Jaw Type: Saw Tooth / Sensor
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws R,CS,I NPN Jaw Type: Chequered / Sensor NPN
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws Z,CS,I NPN Jaw Type: toothed, chamfered / Sensor NPN
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws S,CS,I NPN Jaw Type: Saw Tooth / Sensor NPN
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws EP Jaw Type: EP Coating, blue / EP Coating, blue
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 20 Gripper Jaws PS,CS,I NPN Jaw Type: Parrot Contour / Sensor NPN
Gripper Jaws for creating individual GRZ 20-20
gripper jaws without integrated query optionally can be equipped with a sensor bracket and initiator
jaw material: hardcoated Aluminium
GRZ 32 Gripper with Jaw Type: Chequered / Chequered
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 C Gripper with Jaw Type: Chequered / Sensor
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 CS NPN Gripper with Jaw Type: Chequered / Sensor NPN
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 CS Gripper with Jaw Type: Chequered / Sensor
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 PUA Gripper with Jaw Type: PU Insert / PU Insert
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 C NPN Gripper with Jaw Type: Chequered / Sensor NPN
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 32 EP,CS,I,EP GRZ w. Jaw Type: EP 90, blue / EP 90, blue +Sensor
strong, double-acting gripper , see table for properties of the jaw geometries
piston Ø 32 mm
cylinder can be monitored
best usage with profiles X and JU
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories for example:
Sensor ICS 8 (Part No. 1-808-36-00)
GRZ 25 R Gripper with Jaw Type: Chequered / Chequered
strong gripper with the same high closing force as GRZ 32 in a more compact design
C-groove is integrated in the gripper body
2 pistons, Ø 25 mm
easy to change jaws
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Sensor MFS T2 3,7 (Part No. 1-808-30-00)
Adapter AP PGR 50
Adapter AP HEU 16
GRZ 25 R,CS,I Gripper with Jaw Type: Chequered / Sensor
strong gripper with the same high closing force as GRZ 32 in a more compact design
C-groove is integrated in the gripper body
2 pistons, Ø 25 mm
easy to change jaws
closing force measured at point of jaws at 6 bar
maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
Sensor MFS T2 3,7 (Part No. 1-808-30-00)
Adapter AP PGR 50
Adapter AP HEU 16
GRZ 25 Body Gripper Body
for customizing gripper GRZ 25
single-acting
made of anodized Aluminium
2 pistons, Ø 25
all components easy to assemble
single-acting gripper body
C-groove is integrated in the gripper body
Accessories e.g.:
all GRZ 25 Gripper Jaws
Sensor MFS T2 3,7 (Part No. 1-808-30-00)
Adapter AP PGR 50
Adapter AP HEU 16
GRZ 25 Gripper Jaws R Jaw Type: Chequered / Chequered
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws R,EP Jaw Type: Chequered / EP Coating, blue
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws RL Jaw Type: Chequered long / Chequered long
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws R,CS,I Jaw Type: Chequered / Sensor
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws EP,CS,I Jaw Type: EP Coating, blue / Sensor
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws R,CS,I NPN Jaw Type: Chequered / Sensor NPN
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws EP,CS,I NPN Jaw Type: EP Coating, blue / Sensor NPN
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
GRZ 25 Gripper Jaws EP,CS,I,EP Jaw Type: EP 90, blue / EP 90, blue + Sensor
Backenpaare zur Erstellung individueller GRZ 25
Backen aus hartanodisiertem Aluminium
mit integriertem Permanentmagnet
indirekte Backenabfrage möglich
HUZ 32-30 Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-30 C with sensor Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-30 CS with sensor plug Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-40 Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-40 C with sensor Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-40 CS with sensor plug Gripper 32 with Stroke
strong double-acting gripper on stroke for demolding tasksdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-10 C Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-10 CS Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-20 C Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-20 CS Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-30 C Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 32-20-30 CS Gripper 32 with Double Stroke
strong double-acting gripper on double-stroke (feeding and demoulding stroke), e.g. for demoulding bumpersdouble-acting gripperend positions of cylinders can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Stroke Reducer DB
HUZ 25-30 mit Option Gripper 25 with Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25-30 CS mit Option Gripper 25 with Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 20-10 mit Option Gripper 25 with Double Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 20-10 CS mit Option Gripper 25 with Double Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 32-30 mit Option Gripper 25 with Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 32-30 CS mit Option Gripper 25 with Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 32-30-10 mit Option Gripper 25 with Double Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 32-30-10 CS mit Option Gripper 25 with Double Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HUZ 25 32-30-20 Gripper 25 with Double Stroke
strong gripper GRZ 25 on stroke for demoulding taskscompact and lightweight designend positions of cylinders can be monitoredsingle-acting gripperend position of gripper jaws can be monitoredclosing force measured at the point of the jaws at 6 barmaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)Sensor MFS T2 for monitoring GRZ 25 (Part No. 1-808-30-00)Stroke Reducer DBGripper Jaws for GRZ 25
HEU 16-50 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-25 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-80 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-100 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-125 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-160 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16-200 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 25-80 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-100 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-160 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU 25-200 Stroke Unit with Piston-Ø 25 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 25 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 25 - adapter plate HEUAE-HEU 25 - adapter HEUAU-HEU 25 - adapter HEUAP-HEU 25 - adapter HEU
HEU L 16-25 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partsWeight reduction through aluminum shafts and plastic plain bearings up to 30% lighter than standard lifting units (HEU) with steel shafts
Identical in dimensions to HEUpneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end positions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU L 16-50 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partsWeight reduction through aluminum shafts and plastic plain bearings up to 30% lighter than standard lifting units (HEU) with steel shafts
Identical in dimensions to HEUpneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end positions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU L 16-80 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partsWeight reduction through aluminum shafts and plastic plain bearings up to 30% lighter than standard lifting units (HEU) with steel shafts
Identical in dimensions to HEUpneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end positions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU L 16-100 Stroke Unit with Piston-Ø 16 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partsWeight reduction through aluminum shafts and plastic plain bearings up to 30% lighter than standard lifting units (HEU) with steel shafts
Identical in dimensions to HEUpneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end positions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileHEU 16 A XY - Adapter GP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 10-15 Stroke Unit with Piston-Ø 10 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 10 mm (doubleacting)one cylinder and two guidesStroke Unit can absorb lateral forces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:L-ProfileMounting Bar DKS L 10-60Adapter A3 HEU 10
HEU 10-60 Stroke Unit with Piston-Ø 10 mm
for delivery of various components - numerous mounting accessories allow various applications such as positioning textiles or demoulding partspneumatic Stroke Unit with piston diameter 10 mm (doubleacting)one cylinder and two guidesStroke Unit can absorb lateral forces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:L-ProfileMounting Bar DKS L 10-60Adapter A3 HEU 10
HEU 20-50 Stroke Unit with Piston-Ø 20 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 20-100 Stroke Unit with Piston-Ø 20 mm
for delivery of various components - numerous mounting
accessories allow various applications such as positioning textiles or
demoulding partspneumatic Stroke Unit with piston diameter 16 mm (doubleacting)one cylinder and two guides Stroke Unit can absorb lateralforces and momentsstroke infinitely adjustablemaximum air pressure is 6 bar, use dry and filtered air onlyMonitoring: monitoring of end psoitions (inductive) with IEK 8 or IES 8Accessories e.g.:X-ProfileGP-HEU 16 - adapter plate HEUKN-HEU 16 - adapter for 20 mm clampsAE-HEU 16 - adapter HEUAU-HEU 16 - adapter HEUAP-HEU 16 - adapter HEU
HEU 16 A XY Mounting Adapter for XY-Stroke Unit
e.g. for even more flexibility in pick-and-place robot hands (material injection) easy to assemble and spacesaving designtwo HEU 16 can be adapted to an XY stroke unitangle of the X-stroke can be infinitely adjusted by an integrated centering +/- 45 °both stroke units are connected positively and form locking to the adapter