Part No.: | 1-054-66-00 |
Part No.:
1-054-66-00
- construction profile best suited for secondary machinery and fixtures
- standard channel nuts do not fit, but most connectors are available for this profile
- custom length on request
- special profile length larger than 2000 mm on request
Channels: | 8 |
---|---|
Compatible to: | GWP K; GPF K; KKB-K |
Core hole 1: | 5,0 mm (M6) |
Core hole 2: | 6,8 mm (M8) |
Material: | Aluminium |
Weight: | 18437.6 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
GWP 6-50 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 4 K Channel Nut with one Thread M4
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 5 K Channel Nut with one Thread M5
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 5-10 K Channel Nut with two Threads M5
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6 K Channel Nut with one Thread M6
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 6-15 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-20 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-25 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-30 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-40 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 6-90 K Channel Nut with two Threads M6
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 8 K Channel Nut with one Thread M8
channel nut with 1 threadpictures may differ, for detailed information see data sheet
GWP 8-100 K Channel Nut with two Threads M8
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 8-30 K Channel Nut with two Threads M8
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GWP 8-40 K Channel Nut with two Threads M8
channel nut with 2 threadspictures may differ, for detailed information see data sheet
GPF 5 K Channel Nut with one Thread M5
channel nut with 1 thread and spring ballpictures may differ, for detailed information see data sheet
GPF 6 K Channel Nut with one Thread M6
channel nut with 1 thread and spring ballpictures may differ, for detailed information see data sheet
GPF 8 K Channel Nut with one Thread M8
channel nut with 1 thread and spring ballpictures may differ, for detailed information see data sheet
WSL K 14-50 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL K 20-70 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
WSL K 30-70 VU Long Angle Clamp universal, reinforced
reinforced universal Long Angle Clamp e.g. for mounting Gripper GRZ or other components with round connection to profiles
same allen srcew size for clamping and channel nuts
can be mounted directly on profiles
allows compact gripper design
KVB K 14 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB K 20 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB K 30 Cross Connector
gripper arms, adapters, etc. can be clamped at an angle of 90 ° to the profile
Cross Connector is mounted directly to the profile
exact positioning through an additional positive connection
by loosening a screw, various settings can be made without changing the position of the KVB
KVB G K 10 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G K 14 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KVB G K 20 Cross Connector with Ball Joint
flexible positioning of gripper arms, adapters, etc. through an additional ball joint
Cross Connector is mounted directly to the profile
by loosening a screw, various settings can be made without changing the position of the KVB G
KPL K 40-40 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL K 80-40 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KPL K 80-80 Cross Joint Connector, form-locking
connects profiles in 90 ° to each other
with leading edges (positive locking)
no drilling necessary
after loosening two screws profile can be moved in one direction, after loosening all four screws profiles can be moved in both
KV K 8 Clinch Nut
Profiles can be screwed at a 90 ° angle or at any other angle
one profile must be drilled (Ø A, depth C)
packing unit: 10 pieces
KV L 4 S: “S“ = counter sunk screw M4x8 for L-profile 18x10 mm
Accessories e.g.:
Step Drill STB
SV K 8 Butt Connector
for connecting profiles
packing unit: 10 pieces
one profile must be drilled
in the other profile a thread must be cut frontally
Butt Connector SV K is non-rotating by form locking
Accessories e.g.:
Step Drill STB
Tap Drill GB
WIV JU 40 Angle Joint Connector 90°
reinforces profile connections in 90°
no need for additional works such as drilling or thread cutting
different models for X-, JU- and K-System, see product name
WIV JU 80 Angle Joint Connector 90°
reinforces profile connections in 90°
no need for additional works such as drilling or thread cutting
different models for X-, JU- and K-System, see product name
EVB JU 100 Corner Joint Plate
allows to connect profiles in angles of 90° / 100° / 110°/ 120° or 130°
exception: EVB X 100 allows 90° or 100° connections
no need for additional work like drilling or thread cutting
stable connection to expose profiles at an angle
VBG K 40-160 Straight Support Joint Connector
for connecting profiles
no drilling or tapping required
VBL X 50-75 L-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
VBL K 80-120 L-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
VBT K 120-120 T-Style Support Joint Connector
for connecting profiles
no drilling or tapping required
Scope of Delivery:
3 channel nuts included
ADK K 40-40 Profile End Cap
for closing profile ends
holes for receiving the profile caps should be deburred
cover caps are simply opened with a rubber hammerpictures may differ
ADK K 80-40 Profile End Cap
for closing profile ends
holes for receiving the profile caps should be deburred
cover caps are simply opened with a rubber hammerpictures may differ
ADK K 80-80 Profile End Cap
for closing profile ends
holes for receiving the profile caps should be deburred
cover caps are simply opened with a rubber hammerpictures may differ
STB M8 Stepped Drill
to screw components directly to profiles
for use with e.g.:
Universal Connector UVV
Universal Joint Connector UVF
Cross Connector KV
Butt Connector SV
KKB-K Twist on cable/hose saddle
allows easy attachment of hoses and cables to the Aluminium profile
no tools needed
easy to swivel into profiles
quick installation without screw
subsequent insertion into the profiles possible
cables can be mountedin longitudinal and transverse direction