| Part No.: | 1-474-01-03 |
Part No.:
1-474-01-03
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
IGB H 8 8-11 ID Gripper, Bellow, Lifting | 1-474-01-00 | Gripping Ø: 8,0-11,0 mm, : 14 mm, Jaw type: - | |
|
IGB H 10 10,5-14 ID Gripper, Bellow, Lifting | 1-474-01-01 | Gripping Ø: 10,5-14,0 mm, : 14 mm, Jaw type: - | |
|
IGB H 12 13-17 ID Gripper, Bellow, Lifting | 1-474-01-02 | Gripping Ø: 13,0-17,0 mm, : 14 mm, Jaw type: - | |
|
|
IGB H 14 15-19,5 ID Gripper, Bellow, Lifting | 1-474-01-03 | Gripping Ø: 15,0-19,5 mm, : 14 mm, Jaw type: - | |
|
IGB H 18 19,5-25 ID Gripper, Bellow, Lifting | 1-474-01-04 | Gripping Ø: 19,5-25,0 mm, : 18 mm, Jaw type: - | |
|
IGB H 22 24-31,5 ID Gripper, Bellow, Lifting | 1-474-01-05 | Gripping Ø: 24,0-31,5 mm, : 21,5 mm, Jaw type: - | |
|
IGB H 27 28-37 ID Gripper, Bellow, Lifting | 1-474-01-06 | Gripping Ø: 28,0-37,0 mm, : 25 mm, Jaw type: - | |
|
IGB H 33 34-45 ID Gripper, Bellow, Lifting | 1-474-01-07 | Gripping Ø: 34,0-45,0 mm, : 30 mm, Jaw type: - | |
|
IGB H 41 42-54 ID Gripper, Bellow, Lifting | 1-474-01-08 | Gripping Ø: 42,0-54,0 mm, : 40 mm, Jaw type: - | |
|
IGB H 51 54-68 ID Gripper, Bellow, Lifting | 1-474-01-09 | Gripping Ø: 54,0-68,0 mm, : 50 mm, Jaw type: - | |
|
IGB H 63 66-85 ID Gripper, Bellow, Lifting | 1-474-01-10 | Gripping Ø: 66,0-85,0 mm, : 60 mm, Jaw type: - |
For gripping from the inside. When gripping, the component is lifted. Depending on the application, this can replace a Z-axis for pick and place.
adapted to the Robot-Hand-Kit by Adapter AD IGB
adapted to the Robot-Hand-Kit by Adapter AD IGB
- compact size
- singe-acting
- gripping diameters from 8 mm to 85 mm
- secure gripping
- maximum air pressure is 6 bar, use dry and filtered air only
- Adapter AD IGB
- Exchange Bellows
- Sensor Bracket SH IGB
- Sensor MFS T2 3,7 (Part No. 1-808-30-00)
- 3-pole sensor on demand
| Active principle: | single-acting |
|---|---|
| Bellow material: | EPDM |
| Hose connection: | - |
| Hose connection thread: | M3 |
| Integrated magnet: | no |
| Jaw material: | - |
| Material: | Aluminium |
| Monitoring: | optional |
| Recommended handling weight: | - |
| Weight: | 20 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
AD 14 IGB M12x1 Adapter for IBG
adapts ID Gripper IGB to the robot-hand-kit
clamping diameter suitable for Robot Hand Kit (EOAT)
Balg 14 EPDM Spare Bellow for IGB
Replacement bellows and material variants for ID Gripper IGB
Temperature ranges:
EPDM -30 to +120 ° C
Silicone -40 to +150 ° C
Balg 14 Silikon Spare Bellow for IGB
Replacement bellows and material variants for ID Gripper IGB
Temperature ranges:
EPDM -30 to +120 ° C
Silicone -40 to +150 ° C