| Part No.: | 1-450-12-00-1 |
Part No.:
1-450-12-00-1
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
GRW 20-35 VA Gripper Finger 35° | 1-450-12-00-1 | Gripping angle: 35°, : 20 mm, Closing Force: 50 N | |
|
GRW 30-35 VA Gripper Finger 35° | 1-450-26-00-1 | Gripping angle: 35°, : 30 mm, Closing Force: 160 N |
- e.g. recommended if parts stick
- horizontal finger-design
- end positions can be monitored optionally
- closing force measured at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
- Holding Bracket ANS
- Sensor Mounting Bracket GRF SH AL
- Sensor MFS T2 3,7 (Part No. 1808-30-00)
- Sensor Mounting Bracket GRF SH MFS
- Sensor ICS 8 (Art.-Nr. 1-808-36-00)
- Extension Tube VLR
| Active principle: | single-acting |
|---|---|
| Cable length: | - |
| Coating: | - |
| Connection: | - |
| Connection thread: | M17x1 |
| Contact: | - |
| Hose connection thread: | G1/8″ |
| Integrated magnet: | yes |
| Material: | Aluminium |
| Monitoring: | optional |
| Poles: | - |
| Self-locking: | no |
| Sensor type: | - |
| Signal output: | - |
| Spring: | opening |
| Weight: | 63.64 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
VLR 20-50 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-100 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 20-150 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR