| Part No.: | 1-738-22-00 |
Part No.:
1-738-22-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
|
Gripper 32 on Stroke, Precision Slide, Lightweight | 1-738-22-00 | Model: single stroke, Stroke: 50 mm, Piston Ø: 32 mm, Jaw type: chequered / chequered, Connection: -, Signal output: - | |
|
Gripper 32 on Stroke, Precision Slide, Lightweight | 1-738-23-00 | Model: single stroke, Stroke: 50 mm, Piston Ø: 32 mm, Jaw type: chequered / query, Connection: open cable head, Signal output: PNP | |
|
Gripper 32 on Stroke, Precision Slide, Lightweight | 1-738-24-00 | Model: single stroke, Stroke: 50 mm, Piston Ø: 32 mm, Jaw type: chequered / query, Connection: plug M8, Signal output: PNP |
Strong double-acting gripper on stroke with precision slide for demoulding tasks
- weight-reduced variant, with the same strokes and forces as the conventional HUZ-P variants
- can be easy upgraded with Stopover ZSM: HUZ-PL becomes HUZ-PLZ
- new sliding guide
- free from floating due to spring-loaded sliding elements
- wear is compensated by spring
- double-acting gripper
- end positions of cylinders can be monitored
- closing force measured at the point of the jaws at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
- C: part present sensor IEK 8
- CS: part present sensor IES 8
- Sensor ICS 8 for monitoring cylinder (Part No. 1-808-36-00)
- Stroke Reducer DB
- Stopover ZSM
| Active principle: | double-acting |
|---|---|
| Cable length: | - |
| Closing Force: | 350 N |
| Contact: | - |
| Hose connection thread: | M5 |
| Jaw material: | galvanised Steel |
| Material: | Aluminium |
| Poles: | - |
| Schaftdurchmesser: | 30 mm |
| Sensor type: | - |
| Weight: | 1060 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
ZSM-HUZ PZ Stopover for HUZ-P
ZSM allows easy retrofitting with a second stroke: HUZ-P becomes HUZ-PZ.feeding stroke 50 mmdemoulding stroke: 0-50 mm infinitely adjustableStopover ZSM can be easily mountedMounting in 12.5mm grid, see Figure 4stepless fine adjustmentintegrated C-slot for monitoring end position low-wear rubber buffers dampen the demolding strokemaximum air pressure is 6 bar, use dry and filtered air onlyAccessories e.g.:Sensor MFS T2 for monitoring ZSM (Part No. 1-808-30-00)
AU 20-100 HUZ-P Adapter for HUZ-P
adapter can be positively mounted at 90 ° to the precision sliding guide of the HUZ-P seriesclamping diameter is compatible with the EOAT Robot-Hand-Kit