| Part No.: | 1-450-32-00 |
Part No.:
1-450-32-00
| Description | Part No. | Option | ||
|---|---|---|---|---|
|
GFD 20-90 Gripper Finger 90° | 1-450-10-00 | Gripping angle: 90°, : 20 mm, Closing Force: 110 N | |
|
GFD 30-90 Gripper Finger 90°, double-acting | 1-450-24-00 | Gripping angle: 90°, : 30 mm, Closing Force: 160 N | |
|
GFD 20-90 FS Gripper Finger 90°, double-acting | 1-450-31-00 | Gripping angle: 90°, : 20 mm, Closing Force: 130 N | |
|
|
GFD 30-90 FS Gripper Finger 90°, double-acting | 1-450-32-00 | Gripping angle: 90°, : 30 mm, Closing Force: 185 N |
Version GFD:
- Integrated self-locking: gripper finger snaps into the closed position (90 °)
- double-acting gripper finger
- gripper finger opens when unlocking is subjected to air pressure
- end positions can be monitored
- adjustable holding bracket included
- closing force measured at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
Version GFD FS:
- In case of complete pressure loss, a minimum closing force is mechanically ensured. The GFD FS automatically closes into self-propelled position by spring.
- FS = closing by spring
- gripper finger opens when unlocking is subjected to air pressure
- end positions can be monitored
- adjustable holding bracket included
- closing force measured at 6 bar
- maximum air pressure is 6 bar, use dry and filtered air only
Accessories e.g.:
- Sensor MFS T2 3,7 (Part No. 1808-30-00)
- Extension Tube VLR
| Active principle: | double-acting |
|---|---|
| Cable length: | - |
| Coating: | - |
| Connection: | - |
| Connection thread: | M27x1 |
| Contact: | - |
| Hose connection thread: | M5; G1/8″ |
| Integrated magnet: | yes |
| Material: | Aluminium |
| Monitoring: | optional |
| Poles: | - |
| Self-locking: | yes |
| Sensor type: | - |
| Signal output: | - |
| Spring: | closing |
| Weight: | 299 g |
Downloads and 3D-data are only available to logged in users.
Products matching the article
VLR 30-80 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 30-140 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR
VLR 30-200 Extension Tube
for extending various components of the Robot Hand Kit (EOAT)Extension Tubes VLR are suitable for e.g.:gripper fingers GRF, GFD, GRF Padapters ADZ, AP-PGR, AD IGB AD-GRZ 20 UZTB centering pinand many other componentsit is recommended to glue the VLR